MPPS V21 clone test report OK & K.O experience

There are only 2 variants for the moment ORIGINAL and CLONE.
Clone you can buy for 100EU or less and ORI for 2500EU.
Got one mpps v21 clone from eobdtool.co.uk, and test it working fine so far, below parts are the mpps v21 clone tested report :

Read written FLESH + MPC + EEPROM fiat marely 6f3, OK through OBD.
There are few tools that read-write EEPROM marely by OBD.
OBD-flash reading 3min 20 sec., 45 sec-writing.
MPC and EEPROM read OBD-20 seconds, 20 seconds writing (multyboot OBD) .A very strong and stable tool.

its always a risk with edc17 , this ecu opens easy , boot is safer , if you trust your tool you have to make a choice

tested edc16u1 from T5 2007 1.9tdi AXB 77kw.
read write ok over obd on kline.
make sure you remove the fan plug from fan controller when writing on this cars. when flash is erased the fan will work on max speed .

Ems3132 Bootmode. Read ok. Write not ok.
It erases the flash and cannot write.
Revived by k-tag.

MPPS V18 do not have capabilities to read and write PSG16 trough K-line.
If you want to flash PSG16 In Astra G, or Zafira A with MPPS V18, you must connect to CAN lines directly.
Vectra C, Signum etc – through OBD port.
It is not so bad for a 50-60 euro tool !!!

Jetta 2,0 16v TSi 200cv – MED17.5.2 Tprot10
Read in Boot = OK
made OBD unlock and CKS by MPPS, write boot = OK

siemens ppd 03G 906 018 AQ
BRD: R4 2.0l PPD1.3 G 9973
read ..write obd ok..

it’s working.both can and kline. tested on bmw edc16c31,edc15v/,edc16u1

mpps in bootloader-obd can calculate checksum
Marelli 6F3 or others…

Audi a4 edc17cp14..read… write obd ok.
HW: 03L 906 022 B
R4 2,0L EDC H01 4375

NISSAN Q. EDC16CP33 (4A44383842) R/W OBD = OK (CRC-OK).

Magneti Marelli 6f3, 6JF, 8F2, 8F3 in obd and multiboot with micro and eeprom works very well!

Alfa Roméo Giulietta 2L 170cv EDC16 C39 (can line): read/write by obd ok. Flash ecu failure: mode recovery ok.
Fiat Punto evo 1.3L jtdm 75cv Mareli Multijet MJD8F2/3:read/write by obd ok. Flash ecu failure: mode recovery ok.
Susuki SX4 1.9L 120cv EDC16 C39 (can line): read/write by obd ok. Flash ecu failure: mode recovery ok.

edc16C39 and mjd8 work fine on good V18….without recovery……..

Write edc16C39 failure with fgtec v54, solder failure at the usb socket,
Recovery of ecu with v18 mpps. I confirm my mpps, read write without problem.

Reading psg16 opel zafira ok, writing ok but does not start, does not edit cheksum, write original, everything ok

Used MPPS V18 to Read Flash from Vauxhall Astra 1.7 CDTI 2012 Denso ECU very quick with no issues.
And also EDC17 CP20 on Volkswagen Passat 2.0 TDI 2009 took about 3 minutes..

Suzuki SX4 DDIS 1.9L 120hp, Bosch EDC16C39 2008, can & kline, read & write by obd ok.

mpps= read= unlok file = write unlok file = not boot = kess obd2 = open file unlok = write obd2 kess= ok

opel corsa 1.3jtd MT marelli ecu 6J0 C1,read/write true obd=ok. he reads 448kb and write it,wery fast…

Magneti Marelli 6f3, Reading at the BDM works very well!

Opel Corsa 2004 1.3cdti ecu Marelli MJD6JO.C2 Read OK, Write NOT OK (using full read dump in both cases, read and write), ecu not booting at all…. need to fix it by BDM.

tested today edc16u31 on mk5 golf for a egr off, and all ok read write on kline.

eobdtool.co.uk