PADFlash ECU Programmer supports OBD, Bench, and Boot three modes for Mercedes-Benz CRD3.x ECU reading and writing. In this post, you will learn about how to read and write Benz CRD3.10 data via OBD.
Operation guide:
1.Connect Padflash and computer
Use the USB cable to connect PADFlash ECU & TCU Programmer and a computer/PC (WIN7 or WIN10 64-bit)
Insert the USB KEY that comes with the device into the computer
Make sure the network connection is normal and stable
- Select the corresponding ECU model
Run the PADFlash software on your desktop
Select the ECU model you desire
i.e. MERCEDES>> C KLASSE (From 2000)>> 1.8/2/2 CDI Blue 136/177/204HP Delphi CRD3.x * CAN Fast (TC1797)
Click “Next”
3.Connect Padflash and Benz CRD3.x ECU
Follow the diagram to connect the Padflash and the Benz ECU correctly, and click “OK”
Note:
- Connecting the tool incorrectly to the ECU can cause damage to both.
- Always follow the instructions found on the “Manuals” button for the selected ECU.
4.Read ECU data
Click “ECU Data” to read the data
5.Read File
Click “Read File” to read the file data and input a file name to save it
After the reading is successful, it will show “Reading terminated, turn the ignition off”.
6.Open file
Click “Open file” to select the crd3.1 file you want to write
7.Write File/Recovery
Click “Write File/Recovery” to write the file
Wait a while until the process is complete.
After that, turn the ignition off
Done!
Read also:
What is PADFLASH ECU Programmer? How to Use?
How to Use PADFLASH Software on Windows 10?
PADFlash ECU Programmer Feedback: Support or Not Support?
