One customer reported that he cannot read the Kia edc17cp14 by using PCMTuner with 71 module in bench mode. He tested on many ECUs but no results.
Here is the suggestion from eobdtool.co.uk engineer.
The following edc17cp14 pinout is for Hyundai/Kia. Do not try to read until the ID is successful, need 14v.
Tprot must not be TRPOT3 or TPROT11- if so, need to do via OBD.
If failed to read it with module 71, then try to read by OBD.
If it can be read by OBD, then ECU TPROT is too high for bench mode.
You can do OBD to work, but needs to take more than 2 hours.
Besides, foxflash ecu programmer is a good choice. It also can read Hyundai/Kia edc17cp14 on bench.
Use the following pinout:
Then read and write use the following driver:
→ BENCH TRICORE
→ HYUNDAI / KIA
→ TC1796 – HYUNDAI KIA
→ EDC17 CP14
foxFlash Super ECU TCU Clone & Chiptuning Tool Full Version (€628 with two free gifts in April):
PCMtuner ECU Programmer with Free Silicone Case (€310 in Spring Sales):