Question:
Can I read this car ECU Mitsubishi E6T79990 by KT200? obd read or bench? I see in software not pinout.
Eobdtool.co.uk engineer’s answer:
Yes, this ECU is supported by KT200 ECU programmer.
It is in boot mode, check other E6TX pinouts for the same ecu pin layput, will just be Power, GND, K-line, VPP – Mitsubishi keeps the same schema on ECUs.
Check the Mitsubishi ECU list below.
| Brand | Type vehicle | ECU Brand | ECU type | R/W/VR | Connection mode |
| Mitsubishi | car | Mitsubishi | E6T0x | R/W | PINOUT BOOT |
| Mitsubishi | car | Mitsubishi | E6T34xxx | R/W | PINOUT BOOT |
| Mitsubishi | car | Mitsubishi | E6T38982 | R/W | PINOUT BOOT |
| Mitsubishi | car | Mitsubishi | E6T416xx | R/W | PINOUT BOOT |
| Mitsubishi | car | Mitsubishi | E6T424xx | R/W | PINOUT BOOT |
| Mitsubishi | car | Mitsubishi | E6T462xx | R/W | PINOUT BOOT |
| Mitsubishi | car | Mitsubishi | E6T47xxx | R/W | PINOUT BOOT |
| Mitsubishi | car | Mitsubishi | E6T70xxx | R/W | PINOUT BOOT |
| Mitsubishi | car | Mitsubishi | E6T72xxx | R/W | PINOUT BOOT |
| Mitsubishi | car | Mitsubishi | E6T73xxx | R/W | PINOUT BOOT |
| Mitsubishi | car | Mitsubishi | E6T76xxx | R/W | PINOUT BOOT |
| Ford | car | Mitsubishi | E6T0xx | R/W | PINOUT BOOT |
| Ford | car | Mitsubishi | E6T540x | R/W | PINOUT BOOT |
| Ford | car | Mitsubishi | E6T54xx | R/W | PINOUT BOOT |
| Ford | car | Mitsubishi | E6T56xx | R/W | PINOUT BOOT |
| Ford | car | Mitsubishi | E6T57xx | R/W | PINOUT BOOT |
| Ford | car | Mitsubishi | E6T58xx | R/W | PINOUT BOOT |
| Ford | car | Mitsubishi | E6T59xx | R/W | PINOUT BOOT |
| Mazda | car | Mitsubishi | E6T0x | R/W | PINOUT BOOT |
| Mazda | car | Mitsubishi | E6T0xx | R/W | PINOUT BOOT |
| Mazda | car | Mitsubishi | E6T540x | R/W | PINOUT BOOT |
| Mazda | car | Mitsubishi | E6T54xx | R/W | PINOUT BOOT |
| Mazda | car | Mitsubishi | E6T56xx | R/W | PINOUT BOOT |
| Mazda | car | Mitsubishi | E6T57xx | R/W | PINOUT BOOT |
| Mazda | car | Mitsubishi | E6T58xx | R/W | PINOUT BOOT |
| Mazda | car | Mitsubishi | E6T59xx | R/W | PINOUT BOOT |
| Opel | car | Mitsubishi | E6T900 | R/W | PINOUT BOOT |
| Smart | car | Mitsubishi | E6T73xxx | R/W | PINOUT BOOT |
| SUZUKI | car | Mitsubishi | E6T13672 | R/W | PINOUT BOOT |
| SUZUKI | car | Mitsubishi | E6T16873 | R/W | PINOUT BOOT |
| SUZUKI | car | Mitsubishi | E6T17 | R/W | PINOUT BOOT |
Easy operation guide to read ECU by KT200:
Run KT200 software
Select Driver>> Select TOOL BOOT>> TOOLS BOOT MODE>> MITSUBISHI BOOT>> the related ECU type
Click INFO to check the pinout diagram
Connect KT200 and ECU by pinout line, and connect to computer by USB cable
Turn on KT200 pinout line button
In the select driver interface, click OK to enter data operation page
Get ID
Then read file
Input a new filename to save the original data
Turn off the dashboard
Reference:
Mitsubishi Outlander E6T70484 ECU Read by KT200 or PCMTuner: Both OK
