V168 Renault can clip diagnostic software has been tested to work without any issue!
Purpose: This write-up explains how Renault CLiP V168 works successfully!
Overview: About Renault Can Clip. You do not need to postpone your trip because of reprogramming or airbag issues that your Renault car is facing. With Renault CAN clip, you can scan and diagnose different problems that you car may have before a long trip.
– In Scope
– Out of Scope
A functionality verification which needs connectivity to a third party application cannot be tested, as the connectivity could not be established due to some technical limitations. This section should be clearly documented, else it will be assumed that Testing covered all areas of the application.
- a)In Scope
Functional Testing for the following modules are in Scope of Testing
- Functions tested: OBDII diagnosis, ECU reprogramming.
- Systems tested: ENGINE, automatic gear shifting, Air conditioning system, SRS, ABS, ASR, MPL, GM, IMMO, KEYZESS GO system, OBD-I I, etc.
- b)Out of Scope
Performance Testing was not done for this application.
- Renault can clip key programming
- Renault can clip ECU programming
- A) of test cases planned vs executed
b)No. of test cases passed/failed
|Test cases planed||Test cases executed||TCs passed||TCs failed|
TCs passed vs TCs failed
Test environment and tools:
The CLIP program isn’t tested with the genuine renault clip diagnostic tool but the china clone!
Renault clip 168 download:
Renault can clip 168 software: tested OK
Renault can clip diagnostic interface: tested OK
– Renault can clip the best-quality version (no communication issues)
– The cheapest version (€99)
Note: Renault can clip diagnostic tool buying guide:
the HQ Renault can clip comes with a chip- CYPRESS AN2135SC or CYPRESS AN2136SC, which helps run faster and more stable than any other versions.
– Issues faced:
Connected to the car and four lights are lit Prompted for this content: 5800 window, units of measurement appear 104 Error 5800: Please check the power supply is connected, the normal connection indicator light red flashes. If it is any problem of these two situations: reconnect, wait about 10 seconds before verification.
1) The installed software can’t run in your computer system stably, there is no communication between the software and the device.
2) The computer USB interface does not work, try to use another one.
Renault can clip Windows 7 32bit
Renault can clip Windows XP
Renault can clip ebay?…maybe not for CAN CLIP!
Best Practices: http://obd2-diag.blogspot.com/p/renault-can-clip.html
Renault can clip ebay?
CAN CLIP Renault unit
Renault can clip PCB (Hot!!!!!!!)
Renault can clip buying guide (Hot!!!!!!!!!!!!!)
Renault clip diagnostic software download (Hot!!!!!!)
Renault clip language
Renault clip adds a new language: Serbian Croatian
Renault can clip windows 7 64 bit? (Hot!!!!!!!!!!)
Renault can clip tutorial of CLIP installation
CAN CLIP firmware update at 20% (solved)
Renault can clip diagnostics & reprogramming
Renault can clip car list
How to re-programming ecu by CLiP
Renault can clip ECU programming (Hot!!!!!!!!!!!!!)
CAN CLiP card key programming (Hot!!!!!!!!!!!!!)
Renault clip programming mode asks for 7 digit serial
Where to download and save data
CAN Clip VS Multidiag Pro VS DDT2000
Renault CLIP running with Nissan Consult 3?
Repair flash ISO & CAN BDM chip
CAN CLiP ISO LED not light up (solved)
Clip RLT 2002 Probe “Failure of reservation of probe” (solved)
Renault CAN CLIP reviews
Renault can clip user manual
Renault clip diagnostic software v168 is 100% no issues to use!