First test report of new ALLSCANNER VXDIAG A3! Check below: VXDIAG A3 work same as ICOM!
How to do BMW Coding for F10 using ALLSCANNER VXDIAG A3 3-in-1 scanner for BMW, JLR and VW and E-Sys 3.27.1?
Step 1: Open “VCXNet DOIP Tool”, select “BMW” then click “Connect VXC” button. (ALLSCANNER VXDIAG A3 support latest DOIP protocol)
Click “DOIP ON” button and first step finish!
Step 2: Open BMW E-Sys 3.27.1 software. Click the “Connect” button.
Select BMW chassis “F10” and “Connection via ICOM/Ethernet” option then click “Connect” button.
Step 3: Choose “Expert Mode” and click “Coding” on left side of menu.
Click “Read” and it will show “FAList” and “FA” folder.
Click “FA” folder then “Activate FA”.
Step 4: Go to SVT Actual section (lower right) and click “Read SVT” button. Then it will display the whole SVT folder, which contains all the ECU folders of your car.
Right click the feature you want to edit and choose “Read coding data”.
You will see following message, just close it.
Step 5: Right click the feature file and select “Edit FDL”. The file will open.
Enter the coordinates in the search bar to find the desired coordinates.
You can find some keywords by typing them without having to type in all the coordinates.
Expand the folder and find the value you want to edit, Right click to choose “Edit”.
Step 6: After change value, FDL Coding is not complete!
Now click the “Save” button to temporarily store the value on computer.
Back to the SVT Actual section, you can find the “Code FDL” button. Click it to transfer the coding values you temporarily saved to your computer to your car.
Wait it 100% complete then click “Close”.
ALLSCANNER VXDIAG A3 for BMW, JLR and VW successfully completes BMW coding same as BMW ICOM!