MINI VCI J2534 Cable with Toyota TIS Techstream V10.30.029 and Firmware V2.0.4 is now available at eobdtool.co.uk. Compared with previous firmware version like V1.4.0, Firmware V2.0.4 supports VPW protocol and the PCB has extra security chip.
What’s NEW for this MINI VCI J2534 Toyota TIS Cable?
- Support VPW protocol for Toyota cars from 1996.
- Support Toyota IMMO Reset.
- Support Toyota car customization.
MINI VCI Toyota TIS Cable PCB:
MINI VCI Toyota TIS Cable Supported Protocols:
– K-Line ISO 9141
– KWP 2000 ISO 14230-4
– SAE J1850 PWM
– SAE J1850 VPW
– CAN 2.0B ISO 11898
– CAN ISO 15765-4
How to know which protocol can be used for your car?
For vehicles from 1996 onwards, it is possible to tell which protocol can be used by examining the particular OBD II connection:
The connector must have material contacts inside pins 2, 4, 5, and 16, but not 10.
The connector must have metallic contacts inside pins 4, 5, 7, 15, plus 16.
The connector must have metallic contacts inside pins 2, 4, 5, 10, plus 16.
The connector must have material contacts inside pins 4, 5, 6, 14 and 16.
BTW, Mini VCI Diagnostic Cable for Toyota TIS Techstream has two options for you: