This article is available with the guide to use Autel IM608 to program the 2012 Land Rover Range Rover Sport when all keys lost.
What you need:
Vehicle: 2012 Land Rover Range Rover Sport
Device: Two Ranger Rover keys
Autel IM608 key programmer with XP400 and J2534 ECU programmer
USB cable comes with IM608 kit
-Diagnostic Frame Work
Something to know before programming:
There’s a module called KVM which stands for keyless vehicle modules. It’s located in the back of the trunk of Land Rover. You’re doing the relearning process if you want to add a key or do all keys lost. You have to take the KVM module out and there’s gonna be some soldering involved where you need to connect it to the XP400 to extract the data and save the file back to the IM608. That’s called Bench mode. There’s different ways to obtain certain EEPROM information. There is bench mode, there’s BDM that stands for background debugging module. There’s boot mode and that’s via OBD.
In this case, we will add keys by OBD.
Step 1: Select Immo Status Scan-> follow the prompt and press OK
Step 2: After step 1, it will prompt “Have you used the USB line to connect the VCI device?”
And get the notice information as below:
1. This function must use the USB line to connect the VCI device.
2. Please turn off Bluetooth first, and then use the USB line connection
You can click the VCI icon at the right bottom to turn off Bluetooth, and make connect the USB cable to JBOX
Step 3: Read and Erase codes, and click “Key learning”
Step 4: Select “All Smart Keys Lost” and follow the prompts to press Start button, turn off the ignition
The VIN, part number and software version will appear on the screen
Step 5: Follow the prompts and put the smart key in your hand when prompted
And put your thumb on the unlock position
Press the Unlock button of the smart key to ne learned for 1s within 5s, if the vehicle does not respond, press a few more times
Step 6: Once the key is learned, put the key away and then click “Yes” to learn the next one by repeating the learning process
Finally, use the keys learned to start the car.
Learn more details about Autel MaxiIM IM608 Diagnosis IMMO Key Programming with XP400 and J2534 ECU Reprogrammer No IP Limit: http://www.eobdtool.co.uk/wholesale/autel-maxiim-im608.html