Working with ACDP Module 13, Yanhua ACDP makes the job simpler and faster to clone Audi VL381 (0AW) gearbox. The special interface board connection method replaces the traditional plugging wire method to prevent plug wire to opposite direction and wrong place. No soldering! No risk!
The connection diagrams can be checked in the Help document on Mini ACDP APP.
Prepare all items as below:
Original and new VL381 gearbox
VL381 interface board
Yanhua Mini ACDP host
20 PIN cable
Step 1: Full back up the original VL381 gearbox data
Install the Yanhua VL381 interface board on VL381 gearbox
Then connect to OBP+ICP adapter by the 20 PIN cable
Short circuit the CAN resistor on the OBP+ICP adapter to the ‘CAN-R-JOIN’
Run Mini ACDP APP
Select VW>> Gearbox Clone>> Audi>> VL381 (0AW)>> Full Backup
Confirm the ACDP device is connected to the gearbox and make sure the network is good
Confirm the gearbox model identified is VL381
Ready to read chip data
Save the chip data read out
Step 2: Full write the new VL381 gearbox data
Connect Mini ACDP with module 13 to new gearbox correctly
Confirm the chip data info
Select the original chip data file just saved in the previous step to write
Ready to write PFLASH and EEPROM data
Data written successfully
The operation guide also applies to VW, Audi DQ200 (0AM/0CM), DQ250 (02E/0D9), DL382 (0CK), DL501 (0B5). Just select the corresponding gearbox model to clone.
For VW/Audi DQ380/DQ381 0DE, ZF 8HP gearbox clone, choose Yanhua ACDP module 19.
For VW/Audi DQ200 (0AM/0CW), DQ250 (02E/0D9), DL382 (0CK), VL381 (0AW) gearbox mileage correction, choose Yanhua ACDP module 21.
For VW/Audi 0DE Gearbox mileage correction, choose Yanhua ACDP module 25.