Ktag Master v7.020 EU Red PCB Newly-upgraded 4LED Indicator on the Ktag PCB: ECU ON/KEY ON/POWER/DATA KTAG 7.020 SW2.23 Newly Update: 1. Online version: means it allows the user to connect to internet when install & run software. No… Continue Reading
How to: CRP3 LPC2478 unlock via J-link As you know, for crp3 we can do the trick for unlock crp3 heating on Ktag or Kess V2 programmer or buy a new NXP and write it (only one time) Here are… Continue Reading
Thread: KTAG or Kess V2 NO 12V – Solved! Part 1: Cannot get 12v of output from Kess V2 I use a AC power to connect to my kess V2 adapter. The seller gave it. it it 12v and… Continue Reading
Here, I'll chip in with some words of Ktag 6.070 programmer rework. Ktag should be able to program with Jtag, BDM and Boot protocols. However, I have no luck with Ktag 6.070 for Tricore BOOT; My way is to rework… Continue Reading
How to make a MED GPT cable 14P600KT06 youself to use with Ktag for Bosch MED17 GPT ECUs reading? Here you go. What is Ktag 14P600KT06 GPT cable: It is used for BOSCH MED17 GPT ECUs How to make a… Continue Reading
Question: Which new firmware ECU Programmer is the best choice to read/write Land Rover? Kess V2 5.017 or KTAG V7.020? Answer: First, please check if your car & ECU is listed or not KESS FW5.017 Land Rover… Continue Reading
Before using the BDM Adapter guide, there is an attention to you. We want to provide you a safe product. After the adapter has secured the ECU BDM Pads, be sure to provide power to ECU with other tools… Continue Reading
Four days ago, eobdtool.co.uk sent me the MCU by DHL and it arrived today. I can't wait to test it. I reworked kess and it seems to work, sw open and show protocol active but I haven't tried on a… Continue Reading
In this post, I will share how to copy Kess V2 and Ktag cables as well as adapters pinouts, including DSG DQ200 and DSG DQ250, less v2 BMW cables, ktag 14P600KT06. The first picture we gather all the pinout cables… Continue Reading
How to read/write PCR2.1 with Ktag: Tricore BOOT Simos PCR2.1 adapter Move the retainer carefully, towards the ECU and ensure that all pins are in their designed position To read EEPROM and unlock ECI, switch the adapter in… Continue Reading
It is confirmed that Mk6 PCR 2.1 can be read by kess V2 Tip from others. help me a lot You can use chinese clone not reworked unit: fgtech v54 , ktag 6.070 , kess v2 4.0.36 But k… Continue Reading
