How to use Autel MaxiIM IM508S to diagnose 2005 Mercedes-Benz CLS (219) ME9.7?
Check the detailed operation guide below.
1.Connection
Connect IM508S and vehicle via OBD cable
Note: For watching clearly, here operate on platform.
Press the Start button on the IM50S tablet
2.Diagnose Mercedes-Benz CLS (219) ME9.7
Tap [Diagnostics] on the main menu
Select Europe>> Mercedes- Benz
Agree with the disclaimer
Select Automatic selection>> tap “Read” to acquire VIN>> Up to 05/2005>> left-hand steering
Confirm the vehicle info read out
Enter [Diagnostic menu]
Select Diagnosis>> Auto scan
There is fault code detected on ME9.7-Motor electronics 9.7.
Perform the function supported in sequence
Read ECU info- OK
Read trouble codes- OK
View live data- OK
Actual values include the following items:
- Check the engine at cold start and in warming-up phase.
- Check the engine at idle speed.
- Test values during driving (full throttle)
- Fault counter
- Lambda control
- Electronic Accelerator (EA/EFP)
- Drive authorization
- Electric suction fan for engine or A/C
- Generator
- Heat management
- Adaptation data
- Further actual values
Active test- OK
Supporting:
Y32 (Air pump switchover valve),
M33 (electric air pump) (USA, EURO 3. EURO 4, D4)
Y62 (Fuel injectors)
M16/6 (Throttle valve actuator)
M3 (Fuel pump)
Y58/1 (Purge control valve)
Mixture adaptation
M4/7 (Engine and AC electric suction fan with integrated control)
Y22/6 (variable intake manifold switchover valve)
Y49/5 (Right camshaft intake solenoid)
Y49/4 (Left camshaft intake solenoid)
Y49/7 (Right camshaft exhaust solenoid)
Y49/6 (Left camshaft exhaust solenoid)
Alright! That’s the simply guide to diagnose Mercedes-Benz CLS (219) ME9.7 2005 with Autel IM508S key programmer.
Read also:
How to Register and Update Autel MaxiIM IM508S (IM508II)?
How to Generate Universal Key with Autel IM508S (IM508 II)?
