OBDSTAR DC706 with ECM V30.96 can read and write Volkswagen SIEMENS SIMOS 3.3A 29F400BB+93C76 ECM EXT EEPROM (95320) EXT EEPROM and Flash data, Pincode and IMMO OFF in Bench mode perfectly. OBDSTAR P004 Adapter & ECU Clone Jumper, main cable… Continue Reading
Lonsdor released a new Lonsdor KH100+ Hand-Held Key Programmer. It’s blue, and newly added four remote keys and Indian cars TATA and Mahindra than the old Lonsdor KH100+ (grey). Except that, they support the same functions. Advanced functions: Identify copy Chip simulation Remote generation… Continue Reading
Customer problem: I wanted to use X431 PAD7 to convert miles to kilometers, Fahrenheit to degrees Celsius, etc on my Volvo V70 2006. I selected km and the F1 button, and the loading window started, but the window disappeared and… Continue Reading
Yanhua Tech newly released Yanhua ACDP Module 34 to work with Mini ACDP-1 and ACDP-2 to add new key, do all keys lost and correct mileage on VW MQB RH850 IMMO. No soldering, No need to pry up the chip pins, No capacitor removal.… Continue Reading
Alientech KESS V3 ECU Programmer with the advanced DynoDrive function allows customers to calculate and verify while driving a vehicle. The DynoDrive feature can be activated by all users with the KESS3 Master Version and Slave Version and does NOT… Continue Reading
TOPDON newly released two diagnostic interfaces- Rlink X7 for GM and Rlink X7 for VAG. They support CAN FD and DoIP protocols as the same function as VXDIAG VCX FD. Check more info below. Main content: TOPDON RLink X7 GM and VAG Introduction TOPON… Continue Reading
Dear new and old customers, Alientech is releasing a big sale for KESS V3 ECU Programmer now. Purchase KESS3 Master Version and Car LCV OBD-Bench-Boot Protocols Activation at about 50% off! Valid date: from July 22nd to August 31st, 2024! Don’t miss it!… Continue Reading
Lonsdor K518 Pro/K518 series key programmers updated Auto IMMO Models for SEAT on July 19th, 2024. Bosch ME7.1/7.5/7.8, Dalu CAN instrument (NEC+24C64 2013)/ (NEC+24C64)/ (CDC32XX+24C32)/ (NEC+24C32) and more models were newly added. Check the update info below. Added SEAT AUTO IMMO Models: SEAT\Select… Continue Reading
Both Launch X431 PRO5 SmartLink (new) and X431 PRO5 SmartBox (old) can work with X431 Key Programmer to read transponder, generate transponder, detect frequency, detect ignition switch coil signal, generate Remote (Launch X431 remote), and unlock Toyota smart key, etc functions.… Continue Reading
Yanhua Volvo (2023-) CEM Interface Board Set New Arrival! It’s specially designed to work with Mini ACDP2 to read Volvo (2023-2024) CEM data by ICP. No need to dismantle any chip or components! No soldering! 1.Feature Read VOLVO CEM No need to… Continue Reading
One customer added new keys to his BMW CAS4+ by CGDI BMW via OBD after preprocessing, but some fault codes were appearing, and he couldn’t start his car with the original car key and a new key, even though reprogrammed… Continue Reading
