To program the millage of cas4 1n35h, Yanhua Digimaster3 is good. I have a minimum 20 times CAS4 – done with success full – and 0 times with “problem” or “damage” ! I have using it for +- 3 years and update's regular. Besides, if you have 2000-2014 BMW CAS, you could try also Digimaster3. Attach a table of 2000-2014 BMW CAS models list.
Digimaster 3: 2000-2014 BMW CAS models | ||||||
BMW Car Model | CAS1 | CAS2 | CAS3 | CAS3+ 9S12XDP512 | CAS4 | FEM |
BMW 1 Series | 2004-2006
(E87) |
2007(E87) | 2008-2011
(E87) |
2012-2014(F20) | ||
BMW 3 Series | 2005-2006
(E90) |
2007(E90) | 2008-2012
(E90) |
2013-2014
(F30/F35) |
||
BMW 5 Series | 2004-2006
(E60) |
2007(E60) | 2008-2010
(E60) |
2010-2014
(F07/F10 /F11/F18) |
Not available yet | |
BMW 6 Series | 2004-2007
(E63/E64) |
2008
(E63/E64) |
2009-2010
(E63/E64) |
2011-2013
(F12/F13) |
Not available yet | |
BMW 7 Series | 2001-2004
(E65) |
2004-2008
(E66) |
2009-2013
(F01/F02) |
Not available yet | ||
BMW X1 Series | 2010-2014
(E84) |
Not available yet | ||||
BMW X3 Series | 2011-2013
(F25) |
Not available yet | ||||
BMW X5 Series | 2007(E70) | 2008-2013
(E70) |
2014(F15) | |||
BMW X6 Series | 2008-2014
(E71) |
Not available yet | Not available yet | |||
BMW Z4 Series | 2010-2013
(E89) |
Not available yet | Not available yet | |||
Remark | Mileage Correction: support, process CAS via OBD or BDM (wiring), need to remove the board and solder to it and program it.
Key programming: Support, via OBD or BDM (wiring) |
Mileage Correction: support, process CAS via BDM (wiring), need to remove the dashboard. Key programming: Support, via BDM (wiring) |
Mileage Correction: support, process CAS via OBD or BDM (wiring), need to remove the board and solder to it and program it.
Key programming: Support, via OBD or BDM (wiring) |
Mileage Correction: support, process CAS via OBD or BDM (wiring), need to remove the dashboard and solder to it and program it. Key programming: Support, via OBD or BDM (wiring). So far you can only program CAS3+ key via OBD. |
Mileage Correction: support, process CAS via BDM (wiring), need to remove the dashboard. Key programming: Support, via BDM (wiring). It supports up to 06/30/2016, after 06/30/2016 it is CAS4+ and it doesn’t support. For the CAS system after 2010, it comes with cpu of 5M48H. |
Mileage Correction: support, process via adding FEM filter, one way is to directly add to the FEM module and another way is to add to the back of dashboard. Key programming: Not Support |
CAS3 9S12DG256(0L01Y)CAS3+ 9S12XDP512(0L15Y)
For a small part of CAS3+ after 2013, the CPU is OM23S
CAS4 9S12XEP100(5M48H)
There are two versions of FEM module. X5 is the new version and the filter is connected to the back of dashboard, the manufacturer doesn’t have wiring diagram.