As of this writing, it will list different points of OPCOM V120309a/ 090714 Firmware V1.45/ V1.59/ V1.39. Since OPCOM Diagnostic Tools are all hot sell products at http://www.eobdtool.co.uk/ and many people get confused because OPCOM devices at obdtool seem similar… Continue Reading
This post starts with the issue that Mercedes Benz S-class S600 2007 crank and no start. Then according to days’ test and the guide of an experienced technician, finally fixed the problem. Car model and year: Mercedes Benz S600 2007… Continue Reading
Note: The following must be your symptoms for this fix to work. It may fix other symptoms but will 100% fix the following issue. Issue: CCC starts for the first boot in the morning, and maybe one in the afternoon… Continue Reading
MINI VCI techstream V10.30.029 Success Case Start by purchasing Xhorse Mini VCI cable Techstream software even here: http://www.eobdtool.co.uk/wholesale/mini-vci-for-toyota-tis-techstream-newest-software.html The price of a pair of tens. Reads and does everything and a bit more. (Visit the Toyoon with the OBD connector… Continue Reading
This is the instruction on how to install Citroen & Peugeot diagnostic system DiagBox 7.76 for Lexia 3. Lexia 3 compatible software info: Lexia 3 can work with PP2000 and DiagBox for Citroen & Peugeot vehicles. PP2000 usually is better… Continue Reading
Want to first experience Ford and Mazda software?? Free download Ford V101/ V100 and Mazda IDS V100 here to test with your VCM II clone or VXDIAG NANO for Ford or Mazda. Free download: Mazda IDS v100.00 (tested OK on VXDIAG VCX NANO for… Continue Reading
Good news! BMW INPA K+CAN is newly added with a switch, it can communicate with Kline, and its PCB is equipped with FT232RQ Chip. It sells only 17.99USD free shipping. BMW INPA K+CAN works on BMW with 8 pin &… Continue Reading
Rheingold with K+Dcan cable cannot regonize cars (SOLVED) As we all know, BMW K+Dcan interface can work good with INPA software. But what about Rheingold? Here, eobdtool.co.uk find a good way to make Rheingold work ok with K+Dcan cable. Put… Continue Reading
X-PROG, AK90 and R270 programmer users, please pay attention please: The BMW EWS 4.3 4.4 IC Adapter is newly realesed at eobdtool.co.uk, with this adapter, you can read write data from BMW EWS 4.3 4.4 Immobilize using IC Adaptor together… Continue Reading
This post aims to recommend the best low cost BMW diagnostic tools for 2010 f10 530d. Car model: 2010 f10 530 d BMW diagnostic tools recommended: BMW Rheingold BMW C110 scanner BMW C310 scanner BMW INPA The recommended BMW diagnostic tools… Continue Reading
ICOM, ICOM A1 and Common version ICOM A2 Firmware Update Steps and Note: 9 Steps: 1. Use Network cable to connect ICOM (ICOM A1 or Common version ICOM A2) with a computer, charge ICOM (ICOM A1 or Common version ICOM… Continue Reading
