Device: Xprog m 5.84
Purpose: read BMW CAS3
Error message: Device silence
Description:
When I installed software and hardware I try read BMW CAS3. Read chip and then I get message “Device silence”. When I closed and open again software I get message all the time (I have attached photo). I don't know if my laptop connect automatically to internet when I connect hardware and open software. I don't do any update but I don't know if its make automatically. Do you know if CD software have dump file. If yes can I write it to atmega64 from other Xprog?
Image:
Reason: Your xprog 5.84 has lost authorization.
Solution: Please download Xprog 5.84 never-lost-authorization version
It's Xprog M 5.84 version 07.2019.
Free download 07.2019 Xprog 5.84 for “device silence”:
https://mega.nz/#!cccliAKS!hpjSF40MdMBQtxuvq0cbVerDvSKDMcAXuWIFnYUQFQw
Bugs fixed for error “Device Silence”, updated in July 2019!
PC requirement:
- Windows system should be windows XP 32 bit or windows 7 64 bit, all patch programs for the windows system should be installed already and windows works well …
- Windows system should be with two partitions (except for the CD).
- CANNOT work with Virtual Hard Disk.
Xprog 5.84 Installation instruction:
- Click on the file “installation. reg ”, get file information in regedit.
- Install the file “AdbeRdr11000_zh_CN.exe”, this is necessary, otherwise the Xprog software will not start.
- Connect the main interface Xprog to the computer, install the USB driver.
- copy the “XPROG-BOX 5.84” folder to the desktop and open it, and run “xprogdesktop.exe”, then open the software.
Video: Xprog 5.8.4 Windows 7 install
Xprog 5.84 New Features:
AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9
Xprog-m 5.8.4 Full Authorization:
AUTH-0001 Motorola HC05 family authorization (allows you to read / write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows you to read / write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows you to read / write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows you to read / write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370 / TMS374 family authorization (allows you to read / write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows you to read / write protected EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read / write / erase device in delivery status.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows you to read / write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9 / E9 authorization security bypass (allows you to bypass the protection bit and Read EEPROM and RAM)
AUTH-0012 national CR16 resolution (allows you to read / write EEPROM memory)
AUTH-0014 ST7, ST10 authorization family (allows you to read / write the built-in flash)
AUTH-0015 authorization MPC5xx (depending on the device, the program automatically determines MPC5xx, M95xxx device type, flash, external flash and memory configuration size)
AUTH-0018 Motor ola HC12, HC912, MC9S12, MC9S12X authorization security bypass (allows reading / provided by EEPROM and flash memory)
AUTH-0020 hand (microns, …) Family authorization (allows you to read / write internal flash and external serial EEPROM)
AUTH-0021 hand (microns, …) Authorize family bypass security (allow you to read / write protected and unprotected internal flash and external serial EEPROM, view / change mileage, chassis number (VIN), serial number and pin).
AUTH-0023-1 MAC7xxx
AUTH-0023-2 XC23xx
AUTH-0024-1 MC9S12Cxx
AUTH-0024-2 MC9S12XE
AUTH-0024-3 9S12XE Safety
AUTH-0024-4 MC9S12HA / HY / P
AUTH-0025-1 MPC / SPC5xxx Authorized 2016/3/13
AUTH-0027-1 HC (S) 908 update authorized on 2016/3/13
AUTH-0027-2 HC (S) 908 sercurity authorized 2016/3/13
AUTH-0028-1 Renesas V850 authorized 2017/10/9
AUTH-0028-2 Renesas SuperH authorized 2017/10/9
source: http://www.eobdtool.co.uk/wholesale/xprog-m-v5-84-ecu-programmer.html