Customer Problem: I'm looking for x300 DP plus reviews and people say for Peugeot & citroen not working on dash in mileage adjustment and blocking the BSI.
Eobdtool.co.uk engineer replied:
Actually, OBDSTAR X300 DP plus can correct mileage for Peugeot & Citroen. But you need to operate follow the tips as below.
1.During the mileage adjustment process, ensure that the power is sufficient and the voltage is stable.
2.Before performing the adjustment, you must first read and save the instrument and BSI data (EEPROM and FLASH).
3.For the mileage adjustment, it needs to adjust the instrument and BSI module at the same time. If one of them is adjusted first, it will be synchronized by the data of another module and restored to the original mileage. Check the solution as below:
Method 1:
1).First remove the adjustment, do not pull the plug, and then adjust the instrument mileage via OBD.
2).After the adjustment is successful, immediately unplug the instrument (as fast as possible).
3).Then adjust the BSI mileage by OBD. The value is consistent with the instrument.
4).After that, enter the reading mileage, confirm the mileage to be adjusted, and then install the instrument.
Method 2:
1).First adjust the instrument mileage through OBD.
2).After the adjustment is successful, immediately unplug the instrument power supply fuse (as fast as possible, it is recommended to unplug the fuse before adjusting the instrument to check whether the instrument is powered off).
3).Then adjust the BSI mileage through OBD. The value is consistent with the instrument.
4).After that, enter the reading mileage, confirm the mileage to be adjusted, and then install the instrument fuse.
Note:
1).The instrument fuse is on the BSI, and the BSI position is generally below the steering wheel, as shown below.
2).The position of the fuses may vary depending on years and models. According to the BSI module brand type, Valeo is generally F21, Continent is generally F19, and JHNSON CONTRLS is generally F12…
4.BSI menu is based on types, such as “CONTINENTAL BSI-Q0X”, where CONTINENTAL is the BSI brand name, Q0X is the BSI type, X stands for any number 0-9, the device can automatically recognize, if not, the types are not supported. Types can be seen on the BSI module label, as shown below.
FYI…
Here is the OBDSTAR X300 DP Plus Pad2 read & write KM/ EEPROM/ FLASH for CITROEN & Peugeot full list:
Brand | Area | Model | Year | Dashboard Type | Read KM | Write KM | Read EEPROM | Write EEPROM | Read Flash | Write Flash |
CITROEN | ALL | C3 | 2009 | ✔ | ✔ | |||||
CITROEN | ALL | C3-XR | ✔ | ✔ | ||||||
CITROEN | ALL | C4 | 2010- | ✔ | ✔ | |||||
CITROEN | ALL | C4 Cactus | 2014- | Mono | ✔ | ✔ | ✔ | ✔ | ||
CITROEN | ALL | C4 Picasso | 2014- | TFT | ✔ | ✔ | ✔ | ✔ | ||
CITROEN | ALL | C4 Picasso | 2014- | Mono | ✔ | ✔ | ✔ | ✔ | ||
CITROEN | ALL | C4L | ✔ | ✔ | ✔ | ✔ | ||||
CITROEN | ALL | C-ElySee | ✔ | ✔ | ✔ | ✔ | ||||
CITROEN | ALL | CONTINENTAL SC667050+95256
CAN(BSI-Q0X-00) |
BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
CITROEN | ALL | DS3 | ✔ | ✔ | ✔ | ✔ | ||||
CITROEN | ALL | DS4 | ✔ | ✔ | ✔ | ✔ | ||||
CITROEN | ALL | DS5 | ✔ | ✔ | ✔ | ✔ | ||||
CITROEN | ALL | JC easyCAN4+29LV400BB+
95128 CAN |
BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
CITROEN | ALL | JC easyCAN4F1M-32+95128 CAN(BSI04EV-K0X) Type 1 | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
CITROEN | ALL | JC easyCAN4F1M-32+95128 CAN(BSI04EV-K0X) Type 2 | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |
CITROEN | ALL | JC SPC560B60+95128 CAN(BSI04EV2-KEX) | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
CITROEN | ALL | Jumper | 2015 | ✔ | ✔ | |||||
CITROEN | ALL | SIEMENS 1L00M+95128/95256 CAN(BSI-S0X) | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
CITROEN | ALL | SIEMENS D76F0018+95160 KLINE(BSI-E0X/BSI-F0X) | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
CITROEN | ALL | VALEO 2M48H+24C128 CAN(BSIEV-X0X-00) | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
CITROEN | ALL | VALEO 4L00M+95128/25128 CAN(BSI2004-P0X-00) | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
CITROEN | ALL | VALEO SC667152+95256 CAN(BSI-N0X) | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
PEUGEOT | ALL | 208 | ✔ | ✔ | ✔ | ✔ | ||||
PEUGEOT | ALL | 301 | ✔ | ✔ | ✔ | ✔ | ||||
PEUGEOT | ALL | 308 | 2014- | ✔ | ✔ | ✔ | ✔ | |||
PEUGEOT | ALL | 508 | ✔ | ✔ | ✔ | ✔ | ||||
PEUGEOT | ALL | 2008 | ✔ | ✔ | ✔ | ✔ | ||||
PEUGEOT | ALL | 3008 | ✔ | ✔ | ✔ | ✔ | ||||
PEUGEOT | ALL | 5008 | ✔ | ✔ | ✔ | ✔ | ||||
PEUGEOT | ALL | Boxer | 2015 | ✔ | ✔ | |||||
PEUGEOT | ALL | CONTINENTAL SC667050+95256 CAN(BSI-Q0X-00) | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
PEUGEOT | ALL | JC easyCAN4+29LV400BB+95128 CAN | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
PEUGEOT | ALL | JC easyCAN4F1M-32+95128 CAN(BSI04EV-K0X) Type 1 | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
PEUGEOT | ALL | JC easyCAN4F1M-32+95128 CAN(BSI04EV-K0X) Type 2 | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |
PEUGEOT | ALL | JC SPC560B60+95128 CAN(BSI04EV2-KEX) | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
PEUGEOT | ALL | SIEMENS 1L00M+95128/95256 CAN(BSI-S0X) | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
PEUGEOT | ALL | SIEMENS D76F0018+95160 KLINE(BSI-E0X/BSI-F0X) | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
PEUGEOT | ALL | VALEO 2M48H+24C128 CAN(BSIEV-X0X-00) | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
PEUGEOT | ALL | VALEO 4L00M+95128/25128 CAN(BSI2004-P0X-00) | BSI | ✔ | ✔ | ✔ | ✔ | ✔ | ||
PEUGEOT | ALL | VALEO SC667152+95256 CAN(BSI-N0X) | BSI | ✔ | ✔ | ✔ | ✔ | ✔ |
Available link to get OBDSTAR X300 DP Plus key programmer full version (7% off): http://www.eobdtool.co.uk/wholesale/obdstar-x300-dp-plus-key-programmer-full-version.html
Tech support: http://www.eobdtool.co.uk/
Thanks!