This article comes with two methods about how to use iprog+ programmer to adjust mileage.
Method 1: Traditional method-by soldering line
For airbag, dashboard, car radio, ECU, IMMO and MCU basic functions, it needs to weld line on the contact points with iprog+ pro for some car models.
Such as Mitsubishi Lancer X 2007 93C86 as shown in the picture below:
Disadvantage: It will take some time to weld, and it’s easy to solder wrong line. No safe!
Check details about how to use iprog+ iprog pro to adjust odometer, please watch this video:
Method 2: Quick way- By probes adapters
With the probe adapters, you can use iprog+ clone or xprog without welding the lines.
Advantage: It’s very easy to use. Just put the probes adapter at the contact points directly!
Probes adapters are newest cables released at eobdtool.co.uk. It comes with 5 cables including SOP8, DIP8, 2.54mm, 3.0mm and 6.0mm.
How to connect probe adapters with iProg+ pro?
SOP8 with iprog+ programmer
DIP8 with iprog+ programmer
2.54mm 6P with iprog+ programmer
3.0mm 4P with iprog+ programmer
6.0mm 4P with iprog+ programmer
1).Probes Adapters for in-circuit ECU Work with Iprog+ Programmer and Xprog (€46.00): http://www.eobdtool.co.uk/wholesale/probes-adapters-for-in-circuit.html
2).V82 Iprog+ Iprog Pro With 7 Adapters (€102.00): http://www.eobdtool.co.uk/wholesale/iprog-pro-with-7-adapters.html
3).V82 Iprog+ Pro Programmer with Probes Adapters for in-circuit (€130.00):
4).V82 iprog+ iprog Pro with 7 adapters + probe adapters (€139.00):