Eobdtool.co.uk releases a new OBD2 odometer correction tool for 2015-2017 Mercedes- Benz. What’s the advantage of it? How to use?
What’s the advantage of Benz odometer correction tool?
Benz OBD2 Odometer Correction tool covers Mercedes-Benz from 2015 to 2017. It’s the most cost-effective odometer correction tool in the market.
The following car models are supported no need to add a filter:
W222: 2015-2017
W205: 2015-2017
C217: 2015-2017
C190: 2015-2017
C253: 2015-2017
X253: 2015-2017
W447: 2015-2017
W213: 2015-2017 (Updating…)
For cars before 2015 year, you need to add a filter.
How to use Benz OBD2 instrument calibration tool?
Open Mercedes Odometer Correction tool Software
You can see the whole operation instruction in the home page:
Main steps:
Step 1: OBD Read Config Info
Step 2: MCU Data Programming
Step 3: OBD Write Config Info
Step 4: OBD Read mileage
Step 5: OBD Write mileage
Please kindly notice:
1.<Step 1: OBD Read Config Info> and <step 3: OBD Write Config Info> communication takes 15-30 minutes, please make sure the vehicle battery is sufficient!
2.Before operating <step 2: MCU Data Programming>, please confirm whether the meter is 8-drive or 11-drive.
Let’s go one by one!
Step 1: OBD Read Config Info
Click “OBD Read Config Info”
1.If Odometer Correction is supported, here are the tips: Make sure the vehicle battery is sufficient.
2.If Odometer Correction is not supported, here are the tips: For cars before 15 years, you need to add a filter, and then you can operate steps 4(OBD read kilometers) and steps 5(OBD write kilometers); cars after 17 years do not support Odometer Correction temporarily.
When read out the config info successfully, save the data
Step 2: MCU Data Programming
Remove the back cover of the dashboard
Select the type and wiring method according to the type
You can open the wiring diagram directly, there are 5 wires in total (as the picture)
The Dashboard is divided into 8 drives and 11 drives
After connecting the wires according to the wiring diagram, perform the operation.
If the MCU data is edited successfully, the wiring can be removed.
Step 3: Write configuration information
Select the configuration information data read in step 1
Then you can get the prompt that the vehicle configuration information is written successfully
At this time, you can read the mileage first, and then write new kilometers
Step 4: OBD Read mileage
Read out the original mileage success
Step 5: OBD Write mileage
Input a new kilometer to write
here we wrote the mileage is 12345
Then read it out is 12345km
The new kilometer shows on the car dashboard is correct
Available link to get new obd2 odometer correction tool for 2015-2017 Benz: http://www.eobdtool.co.uk/wholesale/obd2-odometer-correction-for-mercedes-benz-2015-2017.html
