FGTech Galletto V54 or Ktag, which can read MPC 5554

FGTech Galletto V54 or Ktag, which can read MPC 5554, after read following users’ experience, you will know the answer.

Users feedback FGTech Galletto V54 read bad MPC 5554:

Many users feedback FGTech Galletto V54 read MPC 5554 error. For example, one user described his problem with Galletto V54 as follows:

I have problem to read TRW EMS2 with galletto. I read like this ecu before without problem, but this one won’t talk.
I checked all connections many times. When I click “connect”, unit read to 90% and stop with errors:
DATA READING
Start data reading…ERROR TIMEOUT GO
ERROR GO_Sub
ERROR SETUP
everything it’s on attachment
I tried change voltage, another cables, reinstall drivers, nothing work..

    I tried change voltage, another cables, reinstall drivers

Although I was advised: “to try ecu in the car if I do not damage during opening. If the car will work, maybe poor contact to pcb”, I have no luck.

With k-tag and BDM100 read MPC 5554 perfectly

With k-tag and BDM100 read MPC 5554 perfectly, but with the galletto Chinese not.

Take one user’s experience for example:

I also had this problem with the MPC5554 TRW EMS2, with mpc55x there was trouble.
Since I have KTag, certain the time I gave up.Problem solved, now it works beautifully.
And what I did in the Annex.

gall3 gall2 gall1

Which Ktag to choose?

K-TAG V2.13 Firmware V6.070 master (Item No.SE80-C), €105+ shipping cost, it’s best selling:

http://www.eobdtool.co.uk/wholesale/k-tag-ecu-programming-tool-master-version.html

K-tag KTM100 V2.13 Firmware V7.003 Master (Item No. SE80-D), its best quality with higher price, €385 + shipping cost:

http://www.eobdtool.co.uk/wholesale/ktag-ktm100-ecu-programmer.html

ktag-ktm100-with-renew-button-se80-d

This is from OBD2 Diagnostic Tool website Auto ECU Programmer technical support

eobdtool.co.uk