How SKP900 Key Programmer add Toyota G chip and H chip key?

This blog is going to show you how to use SuperOBD SKP900 Key Programmer program Toyota G chip key and Toyota H chip key. This guide is tested on 2015 Toyota Sequoia (G chip) and 2014 Toyota Corolla (H chip). Hope it helps you!

How SKP-900 Key Programmer program Toyota G chip key?

skp900-program-toyota-g-chip-h-chip-key-1

First, start SKP900 and select “Immobilizer” function

skp900-program-toyota-g-chip-h-chip-key-2

Choose “Toyota” then “Immobilizer 2”

skp900-program-toyota-g-chip-h-chip-key-3

It will show “Choose OBD2 adapter, turn ignition on”, then turn ignition on with the original key. Press Enter button and wait for it is communicating.

skp900-program-toyota-g-chip-h-chip-key-4

Next, select “Add Key” then it will show “Insert the registered key and turn ignition on”, press the Enter button to continue.

skp900-program-toyota-g-chip-h-chip-key-5

skp900-program-toyota-g-chip-h-chip-key-6

Then, it will ask you to “Insert an adding key and turn ignition on”, so insert the new Toyota G chip key and press Enter button.

skp900-program-toyota-g-chip-h-chip-key-7

Now just wait the immobilizer light go off for about one minute. After the IMMO light is off, the new key is programmed successfully!

skp900-program-toyota-g-chip-h-chip-key-8

How SKP900 Key Programmer program Toyota H chip key?

The procedure is same as SKP-900 programming G chip key. You can follow G chip key programming to add Toyota H chip key.

eobdtool.co.uk