AP PRO2 (APP2) supports VAG, BMW, Mercedes-Benz, JLR, Porsche, Volvo, and Toyota, etc key programming and odometer correction. It is special for BMW BDC2 and VAG IMMO4/IMMO5 MQB NEC35XX systems key programming. No yearly subscription. All licenses activated (Including BMW 6HP Gearbox and Mercedes Gearbox)! Follow this post to get the APPRO2 software and installation guide.
Where to download APPRO2 software?
Two installation packs are required:
- APPRO2 software installation pack
- Microsoft .NET Framework 3.5 SP1” offline installation pack
Please contact Eobdtool.co.uk customer service to get them.
How to install AP PRO2 software?
Operating system requirement:
- WindowsXP
- Windows7
- Windows8
- Windows10
- Windows11
32bit or 64bit system
Step 1: Install or enable net3. 5sp1 on the computer
Use the installation package to install for WinXP
Or enable “Control panel\Programs and features\Enable or disable windows features\.Net Framework 3.5” for Win11/Win10/Win7
Step 2: Click APPRO2\APPRO2Bootup.exe to install software
APPRO2 Software Display:
If you run APPRO2 software and appears “Not yet connected to the Internet”, follow the on-screen prompts to operate.
1.Check whether the line from this computer to the Internet is smooth.
2.Check if the firewall has prevented AP2 software from connecting to the Internet
3.Check if the computer has virus interfering with AP2 software
4.“Setting-server” can set the source server for software download. In mainland China, “NorthChina Server” can be selected, and in other regions or countries, “HongKong server” can be selected.
5.Setting “Setting-Network packet size” to the minimum value can increase the transmission success rate of network data [but the communication/download speed will decrease]
What is the function of APPRO2 Key Programmer?
- Supports VW Skoda Audi IMMO4 IMMO5 key programming and odometer correction.
- Supports VAG IMMO 3.5 key programming and odometer correction.
- Supports MQB NEC35XX locked key programming, MQB49 (add key with sync data), MQB 5A/5C/5D mileage correction.
- Supports read pin code and cs code for some VAGs via OBD
- Supports BMW EWS, CAS1, CAS2, CAS3, CAS4, FEM, BDC, BDC2 key programming, CAS3/ CAS4/ FEM/BDC mileage correction via OBD, F series BDC key programming & mileage via OBD (incl. 085 version), Add BMW BDC2 on bench.
- Supports Porsche Cayenne Kessy, 2010+ 2M25J 5M48H 1L15Y key programming.
- Supports Mercedes Benz FBS3 key programming.
- Supports -2018 JLR and JLR RFA 2018-2022 JPLA K8D2 key programming via OBD.
- Supports Volvo, Lynk & Co key programming (newly add S60/V60 2019-, XC40/XC60 2018-, S90/V90/XC90 2016- , Lynk&Co 2018- CEM offline programming).
- Supports Buick 2016-2023 BCM mileage correction
- Supports Benz 2018-2023 HU6 cluster processor R7F701403 mileage correction.
- Supports Toyota RH850 2023- R7F701401 mileage correction.
- Supports BMW F series 6HP renew, clone Benz VGS2-FDCT and VGS-FCVT cloning.
- Supports BMW ECU and DME reading .
- Support EEPROM reading/writing.
- Supports remote renew/unlock function.
…
APPRO2 BMW BDC2 Add Key Support List:
| Series | Model | Model Years |
| 5 Series | G30 | 2016/11-2020/06 |
| 5 Series | G31 | 2017/03-2020/06 |
| 5 Series | G38 | 2017/03-2020/06 |
| 6 Series | G32 | 2017/07-2020/06 |
| 7 Series | G11/G12 | 2015/07-2019/02 |
| M5 | F90 | 2017/11-2020/06 |
| X3/IX3 | G08 | 2018/05-2021/08 |
| X3 | F97 | 2019/04-2021/07 |
| X3 | G01 | 2017/12-2021/07 |
| X4 | G02 | 2018/04-2021/07 |
| X4 | F98 | 2019/04-2021/07 |
AP PRO2 Module List:
- EN001 Remote Renew
- CN001 Benz FBS3 function
- BN001 CAS4/CAS4+ key programming & mileage correction
- BN002 CAS1-CAS3+ key programming & mileage correction
- AN001 VW/Audi IMM4/IMMO5 key programming & mileage correction
- AN002 VAG NEC35XX Locked key programming & mileage correction
- AN003 Engine ECU (including BMW ISN)
- DP001 AP-PRO CAS4 5M48H/1L15Y programmer
- DP002 IC EEPROM
- DP003 35080/D160
- FN0050 BMW BDC2 add key
Read also:
How to Get Check Code for AP PRO2 Mileage Correction?
UK Professional OBD2 Tools Online Shop
