How to use OBDSTAR X300 DP Plus for 2012 Land Rover Discovery 4?

OBDSTAR X300 DP Plus is a powerful IMMO device with diagnosis &service reset function. This post mainly talks about the guide to correct odometer and program keys to 2012 Land Rover by it.


Car: 2012 Land Rover Discovery 4

Device: OBDSTAR X300 DP Plus B package or C package

Note: Both two kinds of packages support key programming and odometer correction, but only C package can support special functions.


Part 1: Correct odometer

Part 2: Program keys

in detail…

Part 1: Correct odometer

1.Record the current mileage (it’s 153503 km)

2.Enter OBDSTAR X300 PAD2 main menu

Select Diag Program> Cluster calibrate> LANDROVER

> LANDROVER V30.84> 2010-2014> Mileage Calibration


Please pay attention to the note:

1).support the calibration range:0-700000KM

2).general maximum error does not exceed 206 KM

3.Then input the new mileage you want (here is 150000)

4.Confirm the mileage has been input

5.Calibration complete

6.The new mileage shows on the dashboard successfully

Part 2: Program keys

1.Here are two blank keys for programming


Smart key system> -2013> All Smart Keys Lost

3.Then follow the prompts to operate

1).At least smart cards need to be registered to start the vehicle

2).All keys will be erased

Press Enter to continue, press ESC to back

4.Then press start button

5.Switch ignition off

Configuring the system…

6.Program success, hold one smart key to be added

7.Press UNLOCK of smart key to add for 1 sec within 5 sec again

8.Program the first key success, then click Enter to program next key

9.Repeat the same steps as key 1

10.Program key 2 success

Finally, use two keys to start the car perfectly

Hope it helps you!

OBDSTAR X300 DP PLUS B package:

OBDSTAR X300 DP PUS full version C package: