OBDSTAR X300 DP Plus Program 2017 Ford Mondeo Proximity Key AKL with Ford Cable

It has been confirmed by OBDSTAR Tech that 2017 Ford Mondeo Proximity Key (all keys lost) can be programmed by using OBDSTAR X300 DP Plus with the professional Ford ALK cable and OBDSTAR P002 Adapter. No need to repeatedly disconnect or connect battery cables!

First, let’s see the newest OBDSTAR X300 DP Plus FORD/LINCOLN/MUSTANG IMMO Upgrade Info [V34.45] in June 2021.
Function: ALK in alarm active (no need to repeatedly disconnect/ connect battery cables)

Compatible car models:


  • ESCAPE 2020
  • ESCORT 2018-
  • EVEREST 2017-
  • EXPLORER 2017-
  • F-150 2017-
  • F-250 2017-
  • FOCUS 2018-
  • MUSTANG 2017-
  • TAURUS 2017-
  • MONDEO 2017-
  • FUSION 2017-
  • RANGER 2017-
  • AVIATOR 2020
  • CORSAIR 2020 MKC 2015-
  • MKT 2020
  • MKX2015-
  • MKZ2015-
  • NAUTILUS 2018-
  • NAVIGATOR 2018-

Devices required: OBDSTAR X300 DP Plus/X300 Pro4 with P002 adapter and FORD ALK cable
ford mustang immo upgrade

Next, let’s check the related guide to program Ford key AKL:

Car model: 2017 Ford Mondeo

Open the hood of the car
Follow the wiring diagram as below to connect Ford ALK cable to the vehicle and X300 DP Plus

Tap “DP” to enter the main menu
You can click “Tips” to see the related connection diagram and operation guide
obdstar x300dp plus

Select “All Keys Lost” to operate
Note: this function is available by connecting the server. Please ensure the Internet connection is normal.

Confirm whether the P002 adapter, ALK for Ford cable have been correctly connected to the vehicle
Note: For the usage method, you also can refer to the operation instruction on this interface.

Then switch ignition off
Read out the vehicle info incl. VIN, Key count, etc.
x300dp plus

Insert the key into the card slot, the position is as follows:

1.In the armrests
2.Glove compartment

Check if the alarm active
-Click “Enter”

If there is door on the vehicle, you may turn the alarm off by typing in the vehicle door code. If there is door pad, please input door code.
-Click “Esc”

Confirm if load the BCM D- flash (read by a programmer) to continue
-Click “Esc”

Open the driver’s door and use a screwdriver to set the door lock to the lock position (if the door is closed and locked), keep the door in this position until the key is learned.
You can click “Instructions” on this interface to check more details.

Pay attention to the following instructions:

  • In the following steps, the device will automatically try to disconnect and connect the vehicle battery, please do not perform other operations;
  • When the battery is reconnected, the device will try to silence the vehicle alarm, if the operation is not successful, the device will automatically try multiple times;
  • In the following operation, you will be able to choose whether to clear the original car key.

Wait for about 10 minutes!

At this stage, the alarm should beep in the first few minutes and then mute. Listen carefully and there will be two beeps after about 10 minutes.

While waiting, please keep quiet as much as possible. Do not touch any sensor on the car. Once you hear two beeps, press [ENTER], otherwise please wait patiently until you hear two beeps and press [ENTER] again.

Confirm if erase all keys of the current vehicle. If yes, at least 2 keys are required to complete the key programming.
-Click “Esc”
Insert a new smart key into the card slot (Edge key placement)

Note Water cup of the glove box close to the cab side, key is to go forward.
When the process is done, it will show “Key Program successful” on the dashboard.

Press the Start/Stop button
The key programming is complete.
Awesome! OBDSTAR X300 DP Plus program proximity key to 2017 Ford Mondeo successfully.

Device used:
OBDSTAR X300 DP Plus Tablet Key Programmer C Package Full Version with Free P001 Converter & FCA 12+ 8 Adapter:

OBDSTAR P002 Adapter for Toyota 8A and Ford All Key Lost:

The OBDSTAR Ford ALK cable is coming soon! If you need it, please feel free to contact our customer service.
WhatsApp/Hot line: +86 159 7293 3706
Skype: Eobdtool.co.uk
Email: sales@eobdtool.co.uk