Opcom v1.65 & Op-com v1.70 china clone firmware update! And op com china clone software free download, including opcom 2014 and opcom 2010 software vaux-com 120309a.
clone opcom software vaux-com 120309a download free:
https://mega.nz/#!sPBnlZqT!vzaV6dx66ol0Y3gDrWDSAYZFjtkoBJz0cEtmuXWeOFc
It’s a crack version
No password required
No need activation
Free to use
100% Tested by professionals
SAFE to use (the most important!!!!!)
opcom firmware 1.70 download:
http://www.eobdtool.co.uk/wholesale/opel-opcom-diagnostic-tool.html
(Out of Stock) opcom firmware 1.59 download:
http://www.eobdtool.co.uk/wholesale/opcom-op-com-2010-v-can-obd2-opel-newest-version.html
(Out of Stock) opcom firmware 1.45 download:
http://www.eobdtool.co.uk/wholesale/opcom-2012v.html
Opcom fw 1.65 vs. Op-com fw 1.70:
Opcom 1.65 vs. Op-com 1.70 only differs from the PCB design;
Share the same features and functions
Optional to work with opcom software vaux-com: ver. 2010, ver. 2014
confirmed to work perfectly with opcom 2010 or 2014 software
No issues with Opel cars up to 2014
Opel Opcom basic information:
- OPCOM is a special PC-based diagnostic interface, especially for OPEL.
- Software Version:2010/2014 Firmware Version: 1.65/1.70
- DO NOT update opcom online; otherwise, the device would be damaged!
New OPCOM 2010/2014V Software Function:
- It covers almost all Opel cars, incl. new cars with CAN-BUS-based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
- The program allows users to read out and clear fault codes shows you live data and perform output test.
- The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module,
Instrument Cluster, Electronic Climate Control, Body Control Unit, etc. - Since Opel cars adopt many PINs in the OBD connector, the diagnostic interface works as a multiplexer,
and users need to select the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000) - Fault codes will be shown with all information available:
Full fault code text description:
1) Full status information (Present, Not present, Intermittent)
2) Users can print out, save, or copy the fault codes to any other application.
From the fault codes window, users can go directly to the measuring blocks window.
3) The program shows measuring block information on many control module, users can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameters simultaneously.
The sample rate depends mostly on the communication protocol.
For example, the older system like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow during communication, while the newer Multec or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
Users can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN – Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN – Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN – Single-wire, Low Speed CAN-BUS, 33.3 kbps
Opcom User Manual: http://obd2-diag.blogspot.com/2015/09/op-com-user-guide.html
New arrive! OBDSTAR H111 is a new Opel Key Programmer & Cluster Calibration which supports more than 90% Opel models in the market, click to know more if you are interested:
http://www.eobdtool.co.uk/wholesale/obdstar-h111-opel-key-programmer.html
