SUPER MB PRO M6+ vs. Super MB Pro M6

SUPER MB PRO M6+ is newly released at eobdtool.co.uk. It’s the updated version of Super MB Pro M6, greatly improved product functions and compatibility. What is the difference between these wireless star diagnosis tools? What’s new in M6+?

MB Pro M6+ highlights:

100% compatible with the original Mercedes-Benz software;
The front label uses a design with trademark rights and art copyrights to improve product recognition;
Supports BMW Aicoder, BMW E-sys and BMW App;
Supports vehicles with DOIP communication protocol
Full configuration= MB Star full function+ Benz F+G series coding+ Other DOIP

Super MB Pro M6+ vs. MB Pro M6:

Functions		MB Pro M6	MB Pro M6+
Image
Price		€443	€456
Function supported	XENTRY	√	√
	XENTRY Truck	√	√
	DTS	√	√
	VIDEO	√	√
	MB DOIP	√	√
	MB WIFI	√	√
	PC USB	×	√
	PC RJ45	√	×
	BWM Aicoder	×	√
	BWM E-SYS	×	√
	BWM APP	×	√
	Other DOIP	×	√

In conclusion:

Super MB Pro M6+ supports more functions than M6.

Supports E-SYS, Aicoder for BMW F and G series coding
Compatible with BMW BimmerCode, Bimmerlink, MHD, Bimmergeeks, XHP Flashtool, ODIS-e, XDelete, M Flasher etc App
Can be used as DOIP device for VAG

MB Pro M6+ PCB display:

MB Pro M6 PCB display:

How to connect Super MB Pro M6+ and diagnostic software?

MB Pro M6+ hardware instruction:

1.M6+ hardware and MB diagnostic software connection

1)Connect the M6+ hardware box to the car diagnostic interface via the test line.

The red indicator light ① on the host is always on, and the system indicator ② is flashing during startup. After startup, ② is always on and beeps once, indicating the startup is finished.

2)Wired connection

Connect the USB port ⑦ of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free), and the IP address of the network connection property will be changed to 169.254.255.*, Subnet mask: 255.255.0.0, Preferred DNS: 169.254.255.255, click “Advanced”, add multiple IP addresses as 172.29.127.*, 255.255.0.0. After the computer or tablet is connected to the network, ④ the indicator light will be on.

3)Wireless connection: You cannot find the wireless network by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find a M6+ DOIP-**** network on the computer or tablet, just connect it. ⑤ The green light of the wireless indicator is always on, the wired light is off, no setting is required, the password is 123456789.

4)After opening the BEN software lock on the computer side, the original diagnostic test software can be used normally.

5)For remote C-end operation, please consult us.

2. M6+ hardware and BMW software connection

1)Connect the M6+ hardware box to the car diagnostic interface via the test line.

The red indicator light ① on the host is always on, and the system indicator ② is flashing during startup. After startup, it is always on and beeps once, indicating the startup is finished.

2)Wired connection:

Connect the USB port of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free), and change the network connection attribute IP address to 172.29.127.* 255.255.255.0. Click “Advanced” and add a multi-IP address as 169.254.0.* 255.255.255.0. After the computer or tablet is connected to the network, the indicator light ④ will be always on. Press and hold the switch button ⑥ on the side for 3 seconds and then release it. You can see that the ④ green indicator light is always on and then flashing, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.

3)The wireless network can NOT be found by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find a M6+ DOIP-**** network on the computer or tablet. You can connect without any settings, and the password is 123456789, ⑤The wireless indicator green light is always on, ④The wired indicator is off. Press and hold the ⑥ switch button on the side for 3 seconds and release it, you can see ⑤the wireless green indicator light is always on and turns to flash, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.

(4) The computer-side BWM software adopts a wired or wireless connection, and the mobile phone BWM APP software adopts a wireless connection.

(5) For remote C-end operation, please consult us.

3. For DOIP function and hardware connection of other diagnostic test software, please refer to BWM software and hardware connection method.

Video guide:

1. How to configure SUPER MB PRO M6+ via USB connection?