VVDI Key Tool Plus Adds Ranger Rover Sport 2013 Smart Key

This is a demonstration of how to use Xhorse VVDI Key Tool Plus to add Ranger Rover Sport 2013 smart key.

Here are the steps:

1. Accept the disclaimer.
2. Click “Immo Programming”>>“Europe”>>“LandRover”>> “Ranger Rover”>>“Ranger Rover(sport)”.

3. Click “2008-2015”>> “Smart key type 1”>>“Begin”>>“Smart key adding”.

4. Switch ignition off, then click “OK”.
5. When the screen shows the current VIN, click “OK”.
6. When the screen shows “Communication failed! Please make sure: 1. Does the model meet./n2. Is the device normal./n3. Does the device connect to the car normal.”, click “OK”.
7. Click “All smart remotes lost”.
8. Click “OK” to clear all smart keys.
9. When the screen shows “At least 2 keys need to be programmed after all keys lost, click “OK”.
10. Repeat Step 4.
11. Repeat Step 5.
12. Repeat Step 6.
13. Choose “Smart key type 2”>> “Begin”>>“Smart key adding”.

14. Repeat Step 4.
15. Repeat Step 5.
16. When the screen shows the number of the components, click “OK”.
17. When the screen shows the software version, click “OK”.
18. Click “OK” when the screen shows the number of matched keys is 2.
19. Hold the smart key that to be programmed and follow the prompts after pressing “OK”.
20. Press the “UNLOCK” button of the smart key for more than 5 seconds.
21. When the screen shows the number of matched keys is 3, click “Cancel”.

Job is done!