This article is available with the procedure on how to add Yanhua Mini ACDP authorization by yourself, instead of sending the machine serial number to the dealer.
Requirements:
The ACDP with QR code
Tested working fine with:
Computer / PC
IOS system (1.8.4 or above)
Android system 3.0.92 or above
Take an example, after Yanhua Mini ACDP is bonded, it shows “the device does not obtain the authorization of A802 module (the relevant function)” as shown:
Please do by following the below procedure:
Step 1.Please make sure the IOS version is 1.8.4 or above，and Android version is 3.0.92 or above, as shown:
Step 2. There is a paster with authorization code on the module box，take off the green security seal and clean up the QR code.
Step 3.Make sure the ACDP has bounded successfully, and click “me”.
Step 4. Click “module list”
Step 5. Click “ADD”.
Step 6. Click on “Scan QR Code” to start scanning the QR code on the paster or type the authorization card (Capital letters only).
Step 7. Check the authorization card number and click “Submit” after confirmed.
Step 8. When the prompt comes with authorization success, click “OK”.
Step 10. When the prompt comes with refreshing authorization info success, click “OK”.
Step 11. If you want more module authorization info, please click “ADD” for more.
Step 12. If you change another phone or PC, after the ACDP bounded, please click “Refresh” to download your authorization info.
Done.
