GODIAG GT100+ OBDII Breakout Box works well with Autel MK808Z-BT diagnostic scanner to diagnose ECUs on bench no issues. It can check whether the diagnostic tool can send communication signals, tell if the car/ECU module, and cable communication is good or not, directly display the Voltage and Current data during the operation, and display CANBUS, K-Line, Pwm, Vpw+, KWP 2000 protocol communication as well, which allows the engineers or technicians to complete the job without data loss risk.
Here is the example:
Diagnose Hyundai/KIA M7.9.8 ECU
1.Complete device connection before operation
- Remove the MaxiVCI Mini from the back of Autel MaxiCOM MK808Z-BT
- Connect Godiag GT100+ ECU Connector and Autel MK808Z-BT VCI by the Godiag OBD 2-in-1 Extension Cable
- Connect Godiag GT100+ and M7.9.8 ECU via the Godiag Colored Jumper Cable according to the corresponding wiring diagram
- Connect Godiag Power Supply 12V to GT100+
The indicator lights on the device will turn on automatically.
2.Diagnose M7.9.8 ECU with Autel MK808Z BT
Select Diagnostics>> EOBD>> Accept the disclaimer>> Autoscan
Detect out the vehicle protocol
Then view DTC& FFD, I/M readiness, live data, vehicle information, and vehicle status in sequence, all are ok.