EOBDTOOL Blog
Free OBD diagnostic tool Technical Services
  • keydiy kdx4 kd x4 5 in 1 key programmer
  • original alientech kessv3 master version
  • xremover ai chip tuning software starter version
  • xirdecoder dtc chip tuning all solutions software
  • APP2 APPRO2 key programmer
  • yanhua mini acdp 2 key programmer
  • xhorse key tool plus
  • 2024 Xhorse Multi Prog ECU TCU Programmer
  • Autel Key Programming and Advanced Diagnostic Tool
  • Xhorse Top Selling
  • OBDSTAR X300 Classic G3 Key Programmer
Menu Close
  • HOME
  • Xhorse Multi-Prog
  • ECU Chip Tuning Tool
  • Godiag
  • Autel UK
  • Xhorse
  • By Brand
    • Launch X431
    • Autel
    • OBDSTAR
    • CGDI
    • VXDIAG
    • Lonsdor
    • Xtool
  • Software Download
    • INPA Software
    • BMW ENET Cable
    • OPCOM Software
    • MPPS Software
    • Ktag Software
    • KESS Software
    • IPROG PRO
    • ODIS Software
    • VXDIAG Software
  • Update & License Service
  • Technical Support
  • OBD2 Code Scanner
  • Locksmith and Key Cut Tool
  • Odometer Correction Tool
  • Yanhua ACDP 2
  • Blank Car Keys and Chips
Home » Auto ECU Programmer

Auto ECU Programmer

(Fixed) KESS V2 V5.017 and Ktag V7.020 error reading Magneti Marelli

Posted on August 7, 2019 by eobdtool.co.uk

I just bought KESS V2 V5.017 and Ktag V7.020 Master Clone from a vendor recommended by a friend. Both are reformed by the seller to ensure proper operation. At all times the vendor has been very serious and the friend… Continue Reading →

Auto ECU Programmer KESS V2 V5.017, ktag v7.020

Free Download Xprog 5.8.4 FULL Authorization (“Device Silence” Solution)

Posted on July 30, 2019 by eobdtool.co.uk

Device: Xprog m 5.84 Purpose: read BMW CAS3 Error message: Device silence Description: When I installed software and hardware I try read BMW CAS3. Read chip and then I get message “Device silence”. When I closed and open again software… Continue Reading →

Auto ECU Programmer Xprog 5.8.4

2019 Red PCB KESS V5.017 Support 140 protocols: Only 64.99 Euro!

Posted on July 17, 2019 by eobdtool.co.uk

2019 Red PCB KESS V5.017 is a popular auto ECU programmer. Here share the details of this device and where to buy. Kess V2 Introduction: Model name: Kess V2 Master Software Version: V2.47 (Newest) Firmware Version: V5.017 Update: By link Car… Continue Reading →

Auto ECU Programmer Kess V2, Kess V5.017

Question about MPPS V18 or MPPS V21 – Much benefit?

Posted on July 11, 2019 by eobdtool.co.uk

Hi have question about mpps v18 or v 21 it's much benefit to have one ? I have kess ktag dimsport etc. So it's any point to buy one ? Answer: Mpps interface is a nice tool…. But stay away from… Continue Reading →

Auto ECU Programmer MPPS, mpps v18, Mpps V21

Should I buy Mercedes ME9.7 ECU for KTAG ECU Programming

Posted on June 29, 2019 by eobdtool.co.uk

Do you hesitate to buy Mercedes ME9.7 ECU? Here share the highlights and car list of Mercedes ME9.7 with you. Hope can help you out. Mercedes ME9.7 ECU Engine Computer Highlights: 1.Mercedes ME9.7 ECU is very hot sale kits, completely… Continue Reading →

Auto ECU Programmer Mercedes ME9.7

Cloned MPPS V18 Renault Tests + Renault Vehicle Coverage

Posted on June 28, 2019 by eobdtool.co.uk

Received my MPPS v18 china clone last weekend… I paid $66 The link: http://www.eobdtool.co.uk/wholesale/mpps-v18-main-tricore-multiboot-with-breakout-tricore-cable.html I checked the inner board before tests… Post it on a forum. Users with this kind of PCBs said it could work no issues Today, i… Continue Reading →

Auto ECU Programmer MPPS, mpps v18

MPPS Slave vs. Master (Standard Master & Virtual Master)

Posted on June 26, 2019 by eobdtool.co.uk

MPPS interface is available in different configurations. Look at the comparison table below shows the differences: Feature Slave Standalone Master Master Virtual Master Read from vehicle Yes Yes Yes NO Write to vehicle Yes Yes Yes NO Reads open/encrypted files… Continue Reading →

Auto ECU Programmer MPPS, mpps v18

Ktag and Kess V2 5.017 Ksuite2.47 Test Feedback

Posted on June 11, 2019 by eobdtool.co.uk

Here are a lot of review collection of Ktag or Kess V2 5.017 Ksuite2.47, tested through Boot, OBD, K-Line impossible pcr 2.1 by obd polo tdi 1.6 2011 pcr 2.1 full by obd2 ok my kess is real eu clone porsche… Continue Reading →

Auto ECU Programmer Kess V2, KTAG

Ktag unlocked protection car mind protection

Posted on June 1, 2019 by eobdtool.co.uk

This is: How to unlock protection car mind protection MIND CAR CONTINENTAL PCR 2.1 1.5 tdi With Ktag programmer source: http://www.eobdtool.co.uk/wholesale/4led-red-pcb-ktag-v7020.html Go to the Protocols box Then search for the device as shown in the picture then follow the instructions… Continue Reading →

Auto ECU Programmer KTAG

CGDI BMW AT-200 New Feature: B48

Posted on May 13, 2019 by eobdtool.co.uk

Good news! CGDI BMW AT-200 added new feature: B48. Around the globe, this is the first device supports all version of B48. Upcoming free upgrade N20 N55. All versions of engine ISN read write and clone. Upcoming free upgrade F series… Continue Reading →

Auto ECU Programmer BMW AT-200

Iprog corrects odometer for Toyota RAV4 with no problem

Posted on May 2, 2019 by eobdtool.co.uk

Topic: how to use Iprog for Toyota RAV4 odometer correction with no problem. Open Iprog software. Find out Toyota RAV4. RAV4 Denco 93c46. Click on “Old KM” to read out the distance. Write New KM successfully. Done. Iprog+ Iprog Pro is easy to use… Continue Reading →

Auto ECU Programmer Iprog Pro

Post navigation

Page 31/59« First«...1020...27282930313233343536...50...»Last »

On Sale!!!

  • hottest chip tuning software
  • yanhua acdp on sales
  • flex ecu tcu programmer
  • autel update software

YouTube Video

https://www.youtube.com/watch?v=eYhyB3Cygo0

EOBDTOOL Facebook

Car Key Programmer

Auto Diagnostic Tool

Hot Tags:

  • KESS V3
  • Hottest ECU Chip Tuning Files Free Download
  • Lonsdor K518 Pro
    Lonsdor K518ISE
  • VNCI
  • OBDSTAR DC706
  • OBDSTAR P50
  • OBDSTAR X300 Classic G3
  • GODIAG J2534
  • Thinkdiag
  • Autel IM608
  • Autel IM508
  • PADFlash
  • Yanhua Mini ACDP
    Yanhua ACDP2
  • Launch X431 IMMO Plus
  • BMW BDC2

Categories

  • Airbag Resetting
  • Autel
  • Autel Diagnostic Scanner
  • Autel Diagnostic Scanner
  • Auto Code Scanner
  • Auto ECU Programmer
  • Auto Key Programmer
  • Auto Locksmith Tools
  • Automotive Electrical Testers & Test Leads
  • Blank Car Keys and Chips
  • Car Diagnostic Tools
  • CGDI
  • EOBDTool Sale
  • GODIAG
  • Heavy Duty Diagnostic
  • key cutting machine
  • Launch X431
  • MB Diagnostic tool
  • OBD Combination Kit
  • OBD1 to OBD2 Connector Cable
  • OBD2 Diagnostic Software
  • OBDSTAR
  • Odometer Correction Tools
  • Original OBD Tools
  • Other OBD2 Vehicle Tools
  • Uncategorized
  • Vident Scanner
  • VXDIAG
  • Xhorse
  • Xtool

Recent Posts

  • Unlock BMW BDC3 Blade Key Copy by CGDI K2
  • KEYDIY KD-MAX with KD FGB57 Remote Add BMW BDC3 Key in 3 Minutes!
  • XirDecoder Software Update: Tune Directly From the Panel
  • APP2 APPRO2 Flash Sale (Oct.24th- Nov.12th)
  • Keydiy KD-X4 BMW FEM/BDC User Authentication Requirements Solution
  • Solution for Autel IM608 BMW BDC2 Module Damaged after Adding Key
  • How to Choose Launch X431 Tool Connection Mode (WiFi, Bluetooth and USB)?
  • Unlock TopScan Pro APP One-Year Free Subscription for RLink J2534 and X7

CONTACT US

Email: Sales@EOBDtool.co.uk
Skype: eobdtool.co.uk
Whatsapp: +86-15972933706
Website:https://www.eobdtool.co.uk/ eobdtool

EOBDTool.co.uk Mobile Site:

EOBDTool.co.uk Mobile Site

Links

OBDStarTools

             
© 2025 EOBDTOOL Blog. All rights reserved.
Translate »
error: Content is protected !!