EOBDTOOL Blog
Free OBD diagnostic tool Technical Services
  • eobdtool black friday sale banner
  • kess3 black friday sale up to 42 off
  • autel software subscription black friday sale up to 40 off
  • flex black friday sale banner
  • topdon one plus full system bi directional diagnostic scanner
  • magic motorsport korhex boot glitch and mcu access tool for flex
Menu Close
  • HOME
  • Xhorse Multi-Prog
  • ECU Chip Tuning Tool
  • Godiag
  • Autel UK
  • Xhorse
  • By Brand
    • Launch X431
    • Autel
    • OBDSTAR
    • CGDI
    • VXDIAG
    • Lonsdor
    • Xtool
  • Software Download
    • INPA Software
    • BMW ENET Cable
    • OPCOM Software
    • MPPS Software
    • Ktag Software
    • KESS Software
    • IPROG PRO
    • ODIS Software
    • VXDIAG Software
  • Update & License Service
  • Technical Support
  • OBD2 Code Scanner
  • Locksmith and Key Cut Tool
  • Odometer Correction Tool
  • Yanhua ACDP 2
  • Blank Car Keys and Chips
Home » Auto ECU Programmer

Auto ECU Programmer

KTMFLASH ECU programmer china clone Feedback & Guide

Posted on December 5, 2018 by eobdtool.co.uk

As promise I received ktmflash + powerbox tested on edc17C10 and work fine with this tactrix clone. checksum ok all ok ,read write rapid , excellent Tested on edc17cp14 R/W chk ok Instruction: tactrix is connected to the rear of… Continue Reading →

Auto ECU Programmer KTMflash

(Fixed) Kess v2.08 FW 4.036 china clone checksum error after reading ECU

Posted on November 30, 2018 by eobdtool.co.uk

VVM7x86, Kess v2.08 FW: 4.036, china clone I wanted to write a modified file (EgrOff no checksum, because WinOls couldn't repair it). Kess asked me for the original file and I selected it. It answered with an checksum error again… Continue Reading →

Auto ECU Programmer KESS

Which tool can read MCU hc05x32 from Mercedes Benz W202?

Posted on September 28, 2018 by eobdtool.co.uk

Got a problem with w202 eis ,2085450108,unlocks the steering but not starting, Post MCU 1 from eis to fix the error. Xprog, Orange 5, VVDI Prog, UPA USB can read this MCU hc05x32. Question: got a problem with w202 eis… Continue Reading →

Auto ECU Programmer Orange-5, UPA USB, VVDI pro, XPROG

Pinout Iveco Daily Bosch MS6.3 ecu for Fgtech

Posted on September 27, 2018 by eobdtool.co.uk

Here pinout for Iveco Daily Bosch MS6.3 ecu that is not found in ktag. Obd not work, short circuit to ground (0.00V) The following picture helped me with Fgtech. Read/write ok.   www.eobdtool.co.uk  

Auto ECU Programmer fgtech

Ksuite 2.47 for clone Kess 5.017 Feedback Success & Fail list

Posted on September 19, 2018 by eobdtool.co.uk

Ksuite 2.47 for clone Kess 5.017 with red PCB Feedback: success list and failure list by obd. Ksuite 2.47 for clone Kess 5.017 success list: Opel Astra H 1,7cdti 2008 81kw denso ecu Read/write ok no problem Tested also on bosch me 7.1… Continue Reading →

Auto ECU Programmer Kess 5.017, Ksuite 2.47

(Solved) Kess and Ktag error reading Magneti Marelli

Posted on September 13, 2018 by eobdtool.co.uk

Post starts with Kess and Ktag error reading Magneti Marelli description, then provide solutions. Symptom: Kess and Ktag error reading Magneti Marelli. I just bought KESS V2 V5.017 and Ktag K V7.020 Master Clone from a vendor recommended by a friend. Both are… Continue Reading →

Auto ECU Programmer KESS, KTAG

KTMOBD and KTMFLASH china clone, which one?

Posted on September 5, 2018 by eobdtool.co.uk

KTMflash mainly works on new Siemens & gearbox, it needs to desolder ECU when reading and writing. KTMOBD mainly read and write the Japanese ECU like Denso. 1. KTMflash test reports KTMflash ECU Software Install Guide and Read TC1797 Operation… Continue Reading →

Auto ECU Programmer KTMflash, KTMOBD

(Solved) MPPS v16 clone on Audi A3 2.0 FSI Bosch MED9.5.10 K-Line/CAN

Posted on September 3, 2018 by eobdtool.co.uk

MPPS v16 clone for Audi A3 2.0 FSI Bosch MED9.5.10 K-Line/CAN, I can ID the ecu but can't read, getting an error telling me to email the log file. Possible reasons: China clone mpps v16 will kill that ecu for… Continue Reading →

Auto ECU Programmer MPPS, mpps v16

How to install and use Multiflasher V3.15.1 to read write ECU?

Posted on August 27, 2018 by eobdtool.co.uk

Multiflasher V3.15.1 installation step by step and to read & write ECU data successfully. OS: XP, you can try on WIN7. Procedure: Install. Extract “Multiflasher 3.15” to the C:\ Go to C:\MultiFlasher 3.15_Current, send the “MultiFlasher” to the desktop. Install “GrdDrivers… Continue Reading →

Auto ECU Programmer Multiflasher, Multiflasher V3.15.1

KTMOBD ECU Programmer Can Read Audi OAW Gearbox Data OK

Posted on August 23, 2018 by eobdtool.co.uk

  KTMOBD ECU programmer can read out the data of Audi OAW gearbox successfully.   This is Audi OAW gearbox removed from the vehicle, you can see it is connected with KTMOBD ECU programmer. KTMOBD ECU programmer indicator light is… Continue Reading →

Auto ECU Programmer KTMOBD

Multiflasher OBD ECU Programmer for Hyundai Kia Function List

Posted on August 15, 2018 by eobdtool.co.uk

  Multiflasher Ecu programmer for Hyundai kia via OBD is a combination of  one Tactrix Openport 2.0 plus one USB dongle plus (or the software is compatible with other J2534 device. Multiflasher can read ECU data, write ECU data and do calibration,… Continue Reading →

Auto ECU Programmer Multiflasher, Multiflasher Ecu programmer

Post navigation

Page 40/64« First«...102030...36373839404142434445...60...»Last »

On Sale!!!

  • keydiy key programmer remote
  • yanhua acdp2
  • hottest ecu programmer
  • autel update software

YouTube Video

https://www.youtube.com/watch?v=eYhyB3Cygo0

EOBDTOOL Facebook

Car Key Programmer

Auto Diagnostic Tool

Categories

  • Airbag Resetting
  • Autel
  • Autel Diagnostic Scanner
  • Autel Diagnostic Scanner
  • Auto Code Scanner
  • Auto Diagnostic Tools
  • Auto ECU Programmer
  • Auto Key Programmer
  • Auto Locksmith Tools
  • Automotive Electrical Testers & Test Leads
  • Blank Car Keys and Chips
  • Car Diagnostic Tools
  • CGDI
  • EOBDTool Sale
  • GODIAG
  • Heavy Duty Diagnostic
  • key cutting machine
  • KEYDIY
  • Launch X431
  • MB Diagnostic tool
  • MOE DIAGRONIK
  • OBD Combination Kit
  • OBD1 to OBD2 Connector Cable
  • OBD2 Diagnostic Software
  • OBDSTAR
  • Odometer Correction Tools
  • Original OBD Tools
  • Other OBD2 Vehicle Tools
  • TOPDON
  • Uncategorized
  • Vident Scanner
  • VXDIAG
  • Xhorse
  • Xtool

Recent Posts

  • Flex V8.32.0.0 Update: Bosch MG1CS042 and MD1CS012 ECU Unlock with Korhex
  • Top 6 Diagnostic Tools Compared: LAUNCH, AUTEL, TOPDON & THINKCAR
  • How to Update MUCAR 892BT Pro Software and Firmware?
  • How to Copy 2018+ JLR Smart Keys with EoneBoss ED01 on Bench?
  • OBDSTAR Upgrade: Audi, Lamborghini & Bentley Mileage Calibration (2015–2026)
  • OBDSTAR Major Upgrade: FCA MB91F526 BCM Direct Key Learning via OBD
  • EOBDTool.co.uk Black Friday Sale 2026: The Biggest Deals of the Whole Year!
  • Flex V8.31.0.0 Update: Korhex Unlock for JLR Bosch MD1 MG1 TC298 ECUs

CONTACT US

Email: Sales@EOBDtool.co.uk
Skype: eobdtool.co.uk
Whatsapp: +86-15972933706
Website:https://www.eobdtool.co.uk/ eobdtool

EOBDTool.co.uk Mobile Site:

EOBDTool.co.uk Mobile Site
             
© 2026 EOBDTOOL Blog. All rights reserved.
Translate »
error: Content is protected !!