CGDI K2 Smart Key Tool offers advanced Super Chip conversion capabilities. This guide demonstrates the process using the CP8X Super Chip (coming soon).
Step-by-Step Conversion Process
1.Insert the Super Chip
Place your Super Chip into the designated chip slot on the CGDI K2 device.
2.Access Chip Functions
Navigate to:
More Function→ CP8X super chip (or select your target chip type).
3.Select Chip & Enter ID
Choose the correct chip type from the list.
- ID46
- ID4E 46_EXT
- ID7938(ID47)
- ID49
- IDDST80
- DST80_4D72G
- ID4E
- ID48
- IDTEMIC11
- IDTEMIC12
- IDMEGAMOS13
- ID4A
- ID8A(H)
- 8A (blank) chip
- ID4C
For example, select “Set as ID46”
Click “Settings” at the middle bottom of the interface.
Enter the Chip ID (Example: 12567121).
Click “Continue” to begin conversion.
4.Verify Conversion
After completion, confirm the Chip ID matches:
Go to: Chip Identification Copy → Chip Identification
Successful conversion if both IDs match (e.g., 12567121).
Done! That’s whole process to convert super chip using CGDI K2 key programmer.
Read also:
- How to Copy an ID48 96-Bit Chip by CGDI K2?
- How to Get CGDI K2 ID48 96bits Copy Online Calculation Times?
How to Get CGDI K2 ID48 96bits Copy Online Calculation Times?
- How to Solve CGDI K2 Smart Key Tool Load Home Page Failure?
UK Professional OBD2 Tools Online Shop