I bought v96 Julie Emulator two weeks ago. I did IMMO OFF in Delphi DCM3.5 with this device. Here I’d like to share my experience.
Cost & delivery:
V96 Julie car Emulator was at good price, you can purchase it from:https://www.eobdtool.co.uk/wholesale/v96-julie-car-emulator.html
I was so satisfied that all goods kept well when I received the package via DHL.
Julie Emulator does IMMO OFF in Delphi DCM 3.5(PSA)
I received the Julie emulator and I started to test it on my car.
Here are the all tools I used to do IMMO OFF.
DELPHI DCM3.5 as shown in the picture below
DELPHI DCM3.5 ECU includes following pinouts
GROUND-1/3 PIN
+12V-1/5 PIN
CAN-H-1/40 PIN
+12V ACC-1/19 PIN
CAN-L -1/52 PIN
Remove the DCM3.5 ECU shell
Unsolder 95640 memory
Read the values from address 0A2 to 0A5
Remember the values V2S7 marked in the picture
Weld the 95640 memory back to the ECU
Next step need to use Julie version 97
Unsolder 24C02 memory
Write values V2S7 in text section of the external 24C02 EEPROM memory in Julie car emulator
Solder the 24C02 memory back
In this case solder jumpers: 1+2+4+5+6
Weld the Julie Emulator Version 96 to the ECU
CAN-L -1/52 PIN
CAN-H-1/40 PIN
GROUND-1/3 PIN
Power-1/19 PIN
Works correctly and shows blue led
Finally, I solder the ECU board to the PINS, close the ECU and install it into the car.
Very lucky, it can be tested successfully on my car.
