Digiprog 3 DP3 clone V4.94 Software Update Service

Digiprog 3 odometer master clone has been updated to V4.94. If you have old version (V4.85, V4.88 etc) Digiprog3, you can update the device at €39 free shipping.  By installing the DigiProg3 V4.94 update software, you can easily update the software to add more vehicle models and better performance. The update software is now available on eobdtool.co.uk: http://www.eobdtool.co.uk/wholesale/digiprog-3-update-service.html
New DP3 4.94 adds following cars:
Audi
New version -A3
Ford
-F150 24C16
-Falcon 24C02
Mercedes
-W176 New version
-W204 New version Diag
-w212 new version of Diag
Opel
-Insignia New version
New version –Astra
How to install digiprog 3 4.94 update software? /How to update DP3 4.94 step-by-step?
Follow the video instruction to update Digiprog 3 to V4.94
Pre-upgrade tips:
1. Do not update the digiprog 3 online when you use;
2. Disable any anti-virus software on your computer before running an update;
3. Make sure your computer will not become standby status when updating. Computer power must be well connected. Update will take 15-20 minutes;
4. If your Digiprog 3 Serial Number is not 590C8F0E0000, 24CC65070000 or AFD68C070000, it might cause blue problem.
5.  Please confirm the update file is complete as display below, or will cause blue screen too.

 

Instructions:
Copy and paste Digiprog 3 patch and update video rar to desktop, then extract them
Mount on desktop, right click “Properties”
Click “Power”
Set “Turn off monitor” to “Never”
Set “Turn off hard disk” to “Never”
Set “System Standby” to “Never”
 

Set “Wait” value to “9999” minute
Connect DP3 mileage correction tool with computer via USB cable
Wait the system to detect driver
Browse file to C:/Document and Settings/Desktop/Digiprog3-4.94 update video/CDM 2.08.30 y86WHCL Certified
Click “Next”
 

Click “Finish” when driver is installed
Select “Install from a list of specific location (advanced)”, click “Next”
Click “Next”
Click “Finish”
Open 81C62817000-v4.94patch folder on desktop
Open Mysterious girls 1.0
 

Then open My Computer>>Manager>>Device Manager>>Ports>> USB Serial Port (COM4) to check COM Port is set to COM4

Set COM port to “COM4” and filename “Digi1 bin
Click on “Select the port and click me” button

Digiprog 3 4.94 update procedure is end
Click “OK”
Buy cheapest V4.94 digiprog3:

 

eobdtool.co.uk