Original Xhorse VVDI MB TOOL 2016-02-26 update
Require firmware V2.0.7
BENZ V2.0.7 update:
- Attention: All user update device to firmware v2.0.7, software v2.0.7, the lower version dont support password calculation
- User manual v1.2 released, overview v1.3 released
- Add support for renew ECU/Gearbox/ISM etc
- Fix diable key in K-Line protocol
- Fix clear TP in K-Line protocol
- Fix read key bug in password calculation
Free download V2.0.7 VVDI MB BGA Tool key programmer for Benz:
VVDI MB TOOL newly suppport M21 cable and 7-G cable:
M21 cable looks like this:
7-G cable looks like this:
VVDI MB TOOL V2.0.7 update Tips:
Q: i have a problem with update, the update blocked at 49% to begin to second part .
A: in fact your device online update(update firmware)success,you can use it as normal.
update firmware include 2 part.49% means part 1 success,part 2 same as old version.
this few days we are testing/debug our server.later will be ok about firmware update failed at 49% issue.
Q: what to do the update is stable at 49% is it safe to close the software ?? Can i disconnect the device thank u
A: you can closed the software it’s safe for you, your update is ok at 49%, it’s just one bug of the server from vvdi bga tool.
VVDI MB TOOL Feedback:
I use it and sell some to my clients. Very handy and very good tool to test if your keys and EIS working before going back to the vehicle. Sometimes ESL have fault then EIS won’t turn, but when use test platform you know problem is not EIS and only ESL or other problem on car.
Buy it if you always make benz keys.