Both VXDIAG VCX SE and JLR Mongoose SDD Pro can be J2534 Passthru hardware to work with Godiag GT107+ DSG Plus Adapter and pcmflash software 1.20 to read VAG DQ200 and DQ250 gearbox TCU data. No need to press GT107+ analog ignition switch button early, just press it according to the software prompt during the operation.
Device and accessories required:
- VXDIAG VCX SE J2534 Passthru Hardware
- JLR Mongoose SDD Pro diagnostic tool
- Godiag GT107+ DSG Plus Gearbox Data Adapter
- Godiag DB9 DSG Gearbox Universal Conversion Jumper
- PCMTuner USB Smart Dongle (with 67 software modules)
- VAG DQ200 and DQ250 gearbox TCU
How to connect device and gearbox?
- Godiag GT107+ and VCX SE:
Plug the PCMTuner USB Dongle to computer
Connect VCX SE J2534 hardware to computer via USB cable, and connect to GT107+ Adapter directly
Connect GT107+ and DQ200/DQ250 gearbox via the DB9 DSG gearbox universal conversion jumper
Plug the power supply to GT107+
Press 120 ohm CAN resistance switch
Plug the PCMTuner USB Dongle to computer
Connect JLR Mongoose SDD to computer and GT107+ DSG Plus Adapter directly
Connect GT107+ and DQ200/DQ250 gearbox via the Godiag universal conversion jumper
Plug the power supply to GT107+
Press 120 ohm CAN resistance switch
How to read VAG DQ200/DQ250 data?
After connection, run pcmflash software directly, no need to connect network
The interface is different when using different J2534 devices
For VCX SE, select J2534: VXDIAG-J2534
For Mongoose Pro JLR, select J2534: Drew Technologies Inc.- Mongoose Pro JLR
Then select ECU- [58]: VAG DQ200/MQB Boot (EEPROM) or ECU- [58]: VAG DQ250 E/F/MQB Boot
Click “Identification” to identify the gearbox TCU info
When it asks “Would you like to use automatic power control (L-Line)?”
Click “No”
Follow the prompt to press GT107+ ignition switch button. It’s recommended to stay 2 seconds and then press. And then turn ECU power OFF.
After the TCU is identified, click “Read”, and follow the prompt to read and backup data.
Done!
With VXDIAG VCX SE:
With JLR Mangoose SDD Pro: