Honda HR-V 2022 EPB Reset/Replace with Launch X431 Scanner

How to use Launch X431 scanner to perform Electronic Parking Brake (EPB) Maintenance mode on Honda HR-V 2022? Check the step-by-step guide below.

 

NOTE:

This guide applies to the Launch scanner which supports EPB reset/replace function, such as X431 V, V+, PAD VII, PRO5, X431 IMMO Plus, IMMO Elite, X431 PROS V1.0, PRO3S+ Pro3, X431 ProS Mini, CRP919X, etc.

launch x431 scanner honda hr v 2022 epb reset 1

 

Operation process:

Connect Launch X431 Tablet and vehicle

launch x431 scanner honda hr v 2022 epb reset 2

Select Local Diagnose>> Honda>> Honda software (i.e.V48.90)>> 16PIN DLC>> Region

Confirm the vehicle info identified

launch x431 scanner honda hr v 2022 epb reset 3

Scan the system and function

launch x431 scanner honda hr v 2022 epb reset 4

Go to system list, and enter ABS (Anti-Lock Braking System)

ABS control unit will quit communication above 50km/h (30mph). Click “OK” to continue.

launch x431 scanner honda hr v 2022 epb reset 5

Record the ECU ID which is useful for you to query the after-market service center.

launch x431 scanner honda hr v 2022 epb reset 6

Select Special Function

launch x431 scanner honda hr v 2022 epb reset 7

When executing the following functions, PHEV, FHEV and RLX Hybrid, vehicles must be put into maintenance mode for the engine to run.

Select Brake PAD Maintenance Mode

This function is used in Rear Brake PAD Maintenance. Please refer to the service manual for the work procedure.

launch x431 scanner honda hr v 2022 epb reset 8

Select Enter Brake PAD Maintenance Mode

Check the following conditions are fulfilled:

  • Release the parking brake
  • Stop the vehicle
  • Battery voltage is over 10.0 (V)

Press OK to start the PAD Exchange mode

It will take about 25 seconds at the maximum.

Transition to PAD Exchange mode has been completed.

Perform Rear Brake PAD Maintenance.

When the PAD Maintenance is completed, you must return to the normal mode in order to return the PAD to the original position.

launch x431 scanner honda hr v 2022 epb reset 9

Proceed the rear brake pad replace…

launch x431 scanner honda hr v 2022 epb reset 10

Select Back To Normal Mode

Check if the following conditions are fulfilled:

  • Release the parking brake
  • Stop the vehicle
  • Battery voltage is over 10.0 (V)

Return the PAD to the normal state

launch x431 scanner honda hr v 2022 epb reset 11

Wait a moment… it takes about 25 seconds at the maximum.

PAD was moved to its original position. This function procedure is finished.

launch x431 scanner honda hr v 2022 epb reset 12

Operate the Parking Brake on the vehicle…

launch x431 scanner honda hr v 2022 epb reset 13 launch x431 scanner honda hr v 2022 epb reset 14

Finally, read the fault code again, now there is no trouble code.

launch x431 scanner honda hr v 2022 epb reset 15

Alright! That’s the whole process to reset/replace Electronic Parking Brake on Honda HR-V 2022 with Launch scan tool.

UK Professional OBD2 Tools Online Shop

eobdtool.co.uk