GODIAG VAG Test Platforms (GT110+ GT111+ GT112) are specially designed for VW, Audi, Skoda, and Seat dashboards offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, key matching and other functions. All can work with HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154 diagnostic tools, and SUPER VAG K+CAN, Lonsdor, AVDI, ZEDFULL, Xhorse VVDI2, Xhorse VVDI Key Tool Plus Pad, OBDSTAR X300 DP Plus, Autel key programmer, etc.
GODIAG GT110 IMMO UDS POGO PIN Test Platform: for VW, Audi, Skoda, and Seat 4th Generation UDS IMMO systems.
GODIAG GT111: Ideal for VW, Audi, Skoda, and Seat 3rd & 3.5th generation dashboards with CAN-Bus IMMO systems, features POGO PIN technology for reliable connections and offline data reading and writing.
GODIAG GT112: Best suited for VW, Audi, Skoda, and Seat 2nd & 3rd generation dashboards using K-Line communication systems.
| Feature | GODIAG GT110 | GODIAG GT111 | GODIAG GT112 |
| Image |  |
 |
 |
| Supported IMMO System | UDS (4th Generation) | CAN-Bus (3rd & 3.5th Generation) | K-Line (2nd & 3rd Generation) |
| Communication Type | CAN-Bus, UDS | CAN-Bus | K-Line |
| Key Features | – Offline POGO PIN data reading & writing | – Offline POGO PIN data reading & writing | – Offline key & IMMO synchronization testing |
| – Dashboard key programming (including Boot Probe) | – Key & IMMO synchronization testing | – Intelligent IMMO system emergency start area detection | |
| – Voltage/current display | – Intelligent IMMO system emergency start area detection | – IMMO dashboard offline diagnostics | |
| – Power switch | – Instrument mileage repair | – Instrument mileage repair | |
| – Simulated ignition switch | – IMMO data reading/writing | – IMMO data reading/writing | |
| – Buzzer alerts | – Key matching | – Key matching | |
| – CANH UDS communication indicator | |||
| – CR2032 remote key battery detection | |||
| Compatible Models | VW, Audi, Skoda, Seat (UDS Systems) | VW, Audi, Skoda, Seat (CAN-Bus) | VW, Audi, Skoda, Seat (K-Line) |
| Usage Scenarios | Advanced programming for UDS systems | Key matching & IMMO testing for mid-generation vehicles | Diagnostics & programming for older-generation vehicles |
| Primary Functionality | – Advanced diagnostics | – Synchronization testing | – Offline diagnostics |
| – Key programming | – Key matching | – Key matching | |
| – Boot Probe | – IMMO data handling | – Mileage repair | |
| – Real-time voltage/current display | |||
| Connection Method | POGO PIN for UDS dashboards | POGO PIN | K-Line Connector |
How to use GODIAG VAG Test Platform Cables?
They have been tested working well with Xhorse VVDI2 Key Programmer in key programming.
- Xhorse VVDI2 and GODIAG GT110 Cable program keys
Connection:
After connection, turn on the start button of GODIAG GT110 Test Platform
The indication on the dashboard means that the key is not recognized.
The light of the key identifier flashes for a long time indicating that the chip key and the vehicle’s IMMO system do not match, and the chip key needs to be re-matched.
Run VVDI2 software to make a key successfully
After that, the indication on the dashboard means that the key is recognized.
And the light of the key identifier flashes and then goes out indicating that the IMMO chop and the chip key are working properly.
The POGO PIN points on some chip boards are not covered, so you don’t need to remove the cover.
- Xhorse VVDI2 and GODIAG GT111 Cable program keys
Connection:
The flashing on the dashboard indicates that the key is not recognized.
If it turns off for 3 seconds, the key is not recognized or the key chip does not match.
Run VVDI2 software to make a key successfully
The flashing on the dashboard off that means a key has been matched.
The light of the key identifier flashes and then goes out, indicating that the IMMO chop and the chip key are working properly.
The light of the key identifier meanings:
- The light of the key identifier flashes and then goes out, indicating that the IMMO chip and the chip key are working properly.
- The light of the key identifier flashes for a long time ndicating that the chip key and the vehicle’s IMMO system do not match, and the chip key needs to be re-matched.
- The light of the key identifier does not flash which means that the vehicle’s IMMO system is faulty. Please check the vehicle’s IMMO system.
- Xhorse VVDI2Key Programmer and GODIAG GT112 K Line Cable program keys
The operation guide is the same as GT111.
The key recognition coil test (can also be used for emergency star area induction detector of car intelligent IMMO system).
UK Professional OBD2 Tools Online Shop
