There are two new kinds of Godiag CAS Test Platform for sale at eobtool.co.uk. One is GODIAG BMW CAS1/CAS2 Mech-Key Test Platform, and the other one is GODIAG CAS2 CAS3 SER Semi Smart Test Platform. Both cooperate with Xhorse VVDI2/VVDI BIMTOOL Pro/Key Tool Plus Pad/Autel IM608S/CGDI BMW, Lonsdor K518 Pro, and OBDSTAR X300 DP Plus, etc. key programmers to add new key and do all keys lost.
Godiag BMW CAS Test Platform Functions:
1.Detect CAS and key synchronization
2.Solder-free match CAS1/CAS2 mechanical key (Godiag CAS1/CAS2 Test Platform), CAS2/CAS3 serial smart key (Godiag CAS2/CAS3 Test Platform)
3.Read, write, and program CAS module
4.Support new keys adding and all keys lost
5.Back up CAS key data
6.Judge CAS module function
NOTE:
- GODIAG CAS2/CAS3 Test Platform does not support mechanical key CAS2.
- Both Godiag CAS Test Platforms cannot be used with diagnostic tools or GT100, GT100+.
How to use Godiag CAS Test Platform and key programmer?
Here takes VVDI2 key programmer as an example.
1.with GODIAG BMW CAS1/CAS2 Mech-Key Test Platform
Step 1: Connect device
Connect Godiag BMW CAS1 CAS2 Test Platform and the CAS1/CAS2 module, and connect to Xhorse VVDI2 Programmer via OBD2 to DB25 cable and OBD cable, Supply 12V power to test platform, connect VVDI2 to computer via USB cable as well.
Press the start switch
The key doesn’t match with the CAS module before programming.
(The following connection is for the CAS1 module.)
Step 2: operate on VVDI2 software
Select Key Learn>> CAS Key Learn>> Connect to identify the CAS info
Get key info and save the original key info
Select an unused key position, put a new key into the VVDI2 key programmer coil, and click “Prepare dealer key with programmer” to generate the key
The key still cannot match with the CAS module.
Click “Add key” to write the dealer key to CAS system
Add key successfully, the key can match with the CAS module now.
Video guide:
2.with Godiag BMW CAS2/CAS3 SER Semi Smart Test Platform
Connection:
- Connect Godiag BMW CAS2 CAS3 Test Platform and the CAS2/CAS3, CAS3+ CAS3++ module
- Connect Godiag Test Platform to VVDI2 Programmer via OBD2 to DB25 cable and OBD cable Supply 12V power to test platform
- Connect VVDI2 to computer via USB cable
Operation on VVDI2 BMW software:
Step 1: Identify CAS Info
Select Key Learn>> CAS Key Learn>> Connect to identify the CAS info
Step 2: Get and save key info
Get key info first, and save the original key info by clicking the corresponding option
Step 3: Generate key
Select an unused key position, and click “Prepare dealer key with programmer” to generate the key with VVDI2 key programmer
Kindly notice:
Don’t place the key in the GODIAG CAS2 CAS3 SER Semi Smart Test Platform key sensing area. Otherwise, the dealer key will not be generated.
Step 4: Test dealer key
After programming the dealer key, put the key into the Godiag CAS2 CAS3 Test Platform induction port for testing.
For test steps, please refer to “Synchronous Detection of Module and Key”.
If the IMMO light cannot light up, enter the VVDI2 menu, and perform the following steps:
Key Learn>> CAS/EWS Information>> Connect>> Synch DME-CAS or Synch CAS-ELV
When performing synchronization, the key must be placed in the key sensing area of the Xhorse VVDI2 programmer.
Learn more info:
GODIAG BMW CAS1 CAS2 Mech-Key Test Platform:
https://www.eobdtool.co.uk/wholesale/godiag-bmw-cas1cas2-mech-key-test-platform.html
GODIAG BMW CAS2 CAS3 SER Semi Smart Test Platform:
https://www.eobdtool.co.uk/wholesale/godiag-cas2-cas3-ser-semi-smart-test-platform.html