How to Read and Write VW DL501 GEN2 TCM with OBDSTAR DC706 on Bench?

OBDSTAR DC706 ECU Tool can read and write VW DL501 GEN2 TCM in bench mode. Only need about 3 mins!

 

Device and accessories required:

VW DL501 GEN2 TCM

OBDSTAR P004 Adapter and Jumper Airbag Reset Kit

Main cable

OBDSTAR DC706

 

Detailed operation steps:

Supply power to DC706 tablet

Tap ECU Flasher>> All>> TCM>> TCM V30.09>> VW TEMIC DL501 (0B5) DL501_Gen2 TC1784 (BENCH)

Check the Pinout and follow it to connect DC706 and VW TCM with P004 adapter& jumper and main cable

Tap “Start” to enter read/write interface

Tap “Connect” to connect the server

Switch ignition off, and then press the switch button on OBDSTAR P004 adapter (turn the ignition on)

Connect ECU successfully

Then select the corresponding function to perform INT EEPROM/EXT EEPROM/INT Flash read/write operation.

All work fine!

Finally, disconnect and switch the ignition off.

Done!

 

Besides VW DL501 GEN2 TCM, OBDSTAR DC706 also supports DQ200 (0AM/0CW), DQ200Dxx, DQ200-MQB, DQ200 G2, DQ250 (02E/0D9), DL382, DQ400E, DQ380, DQ500, 8HP, etc.

Check OBDSTAR DC706 VW TCM Support List below.

Brand	ECU Brand	Type	Dump	ECU Info	Read eeprom	Write eeprom	Read flash	Write flash	Recalibrate ODO	Connection Method
VW	TEMIC	DQ200 (0AM/0CW) DQ200Dxx	TC1766	✔	✔	✔	✔	✔	✔	BENCH
VW	TEMIC	DQ200 (0AM/0CW) DQ200-MQB	TC1766	✔	✔	✔	✔	✔	✔	BENCH
VW	TEMIC	DQ250 (02E/0D9)	TC1766	✔	✔	✔	✔	✔		BENCH
VW	TEMIC	DL501 (0B5) DL501Gen1	TC1766	✔	✔	✔	✔	✔		BENCH
VW	TEMIC	DQ200 G2	TC1784		✔	✔	✔	✔	✔	BENCH
VW	TEMIC	DL382	TC1784		✔	✔	✔	✔		BENCH
VW	TEMIC	DQ200 G2-PQ	TC1784		✔	✔	✔	✔	✔	BENCH
VW	TEMIC	DQ400E	TC1784		✔	✔	✔	✔		BENCH
VW	TEMIC	DL501 (0B5) DL501_Gen2	TC1784		✔	✔	✔	✔		BENCH
VW	CONTINENTAL	DQ500	TC1766		✔	✔	✔	✔		BENCH
VW	TEMIC	DQ380			✔	✔	✔	✔		BENCH
VW	ZF	8HP			✔	✔	✔	✔		BENCH
VW	BOSCH	DQ500			✔	✔	✔	✔		BENCH
VW	BOSCH	DQ381			✔	✔	✔	✔		BENCH

 

UK Professional OBD2 Tools Online Shop