Installation and Using Tips of KTMflash and KTMOBD ECU Programmer

New arrival KTMflash ECU is a tool which could read-write ECU data, read transmission data etc. It could read Infineon and gearbox transmission ECU. KTMOBD ECU Programmer is now available in eobdtool as well. It could read chip data, read ECU data and read gearbox in a high speed.

In the following post will post some installation tips and using note about these two programmers.

 

Installation and using tips of KTMflash:

1.       Only use the software we suggested

2.       There is no software like ECU Flash  on the computer you want to install. Please reinstall your computer system before install the software according to our installation guide video to avoid locking.

3.       Do not use this software while network connected.

4.       We suggest using the computer based on Intel Processor. We have tested that the software only could use one time on computer based AMD Processor.

5.       There are KTMflash software introduction and test operation video in the CD we send to you which could help you to use the KTMflash well.

6.       You could look up the KTMflash introduction to check the supported ECU.

7.       Read password data before read encrypted Infineon and ECU. Please follow the video guide.

8.       Follow the reference video and introduction to handling the switches

Here post an installation guide of KTMflash:

 

 

Installation and using tips of KTM OBD:

1.       Only use the software we suggested

2.       There is no software like ECU Flashon the computer you want to install. Please reinstall your computer system before install the software according to our installation guide video to avoid locking.

3.       We suggest using the computer based on Intel Processor. We have tested that the software only could use one time on computer based AMD Processor.

4.       Do not use this software while network connected.

5.       KTM OBD ECU Programmer is a tool mainly used to read and write Japanese vehicles’ ECU via OBD.

Also, an installation guide of KTM OBD post here:

 

KTM FLASH KTMFLASH Car ECU Programmer:

http://www.eobdtool.co.uk/wholesale/ktm-flash-ecu-programmer.html

 

KTMOBD ECU programmer & Gearbox Power Upgrade Tool Plug and Play:

http://www.eobdtool.co.uk/wholesale/ktmobd-ecu-programmer.html

 

 

 

 

eobdtool.co.uk