X431 X-PROG3 GIII immobilizer programmer can be used with Launch X431 IMMO Elite, X431 IMMO Plus, V+, or Pad VII to enable reading/writing EEPROM, on-board MCU, and BMW CAS4+/ FEM chips, programming Mercedes-Benz infrared keys, generating special keys, and reading BMW engine ISN code, etc. What is the difference between these Launch diagnostic scanners?
Support multi-language and 2 years free update.
Support same functions: Read immobilizer password, Ignition key learning, Benz BMW VAG Porsche key programming, Basic diagnostic function, Active Test (Di-directional), and Common Service reset functions
Price: X431 IMMO Elite is the cheapest, and X431 PAD VII with X-Prog3 is the most expensive.
IMMO Plus vs. IMMO Elite:
IMMO Elite has basic diagnostics but IMMO Plus has full diagnostics.
- IMMO tablets support Nissan B18 Immo replacement without password, Peugeot all keys lost, Citroen all keys lost/ module replacement, Independent IMMO function for each car brand, and newer vehicle immo programming (Volvo pre-2022, Toyota pre-2022), but V+ and PAD VII do not.
- Only Pad VII supports guided function and online programming.
For details, check the comparison table below.
|Item||Launch X431 IMMO Plus||Launch X431 IMMO Elite||Launch X431 V+ and X-prog3||Launch X431 PAD VII and X-prog3|
|Price||€ 1,009||€ 980||€ 1,294||€ 2,532|
|Language||24 Language Supports: English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian , Romanian, Serbian, Finnish, Swedish, Czech, Chinese Simplified, Chinese Traditional||24 Language Supports: English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian , Romanian, Serbian, Finnish, Swedish, Czech, Chinese Simplified, Chinese Traditional||Multi-Language: English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Dutch, Danish, Korean, Finnish, Swedish, etc||Multi-Language Supported: English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Swedish, Chinese|
|Update||2 Years free update||2 Years free update||2 Years free update||2 Years free update|
|Read immobilizer password||Yes||Yes||Yes||Yes|
|Ignition key learning||Yes||Yes||Yes||Yes|
|Benz BMW VAG Porsche key programming||Yes||Yes||Yes||Yes|
|ECU Gearbox TCU Cloning (IMMO Prog)||Yes||Yes||No||Yes|
|Anti-theft password car coverage||More||More||Less||Less|
|Nissan B18 Immo replacement without password||Yes||Yes||No||No|
|Toyota all keys lost (pre-2022)||Yes||Yes||No||No|
|Volvo all keys lost (-2022)||Yes||Yes||No||No|
|Peugeot all keys lost||Yes||Yes||No||No|
|Citroen all keys lost/ module replacement||Yes||Yes||No||No|
|Independent IMMO function for each car brands||Yes||Yes||No||No|
|Basic diagnostic function||Yes||Yes||Yes||Yes|
|Active Test (Di-directional)||Yes||Yes||Yes||Yes|
|Special function under each car brands||Yes||No, no VAG guided function, Renault special function under Diagnostic.||Yes||Yes|
|Common Service reset functions||Yes||Yes||Yes||Yes|
X-prog3 supports following ECU/TCU cloning function:
Launch X431 tablet requires a USB connection to clone/ replace ECU or gearbox TCU with X-prog3. As X431 V+ only can connect via Bluetooth, it cannot clone ECU/TCU with X431 G III programmer.