SBB Key Programmer V46.02 vs Silca SBB Key Programmer V33.02

SBB key programmer updated to v46.02!  so, what's the difference between SBB key programmer v33.02 and v46.02? Here you go.

 

2017 NEW SBB key programmer:

1.Software Version: V46.02
2.Language: English, Italiano, Deutsch, Francais, Espaniol, Portuguese, Turkish
3.Support Toyota G Chip
4.Read Pin Code for some cars
5.Support Toyota, Honda and Ford (up to 2014)
6.It is a new generation of the SBB Key Programmer

 

OLD SBB key programmer:

1. Software Version: V33.02
2. Language:Italian, German, French, English, Spanish, Greek, Portuguese, Turkish, Russian
3. Car list:  1996-2010, such as audi,vw,bmw,toyota,honda,nissan..
4. It's necessary for a SBB v33.02 to program keys with PIN codes. But SBB can read pin codes for a few cars only. For the professional pin code reader, you can check VPC100 Pin Code Reader

 

SBB key programmer v33.02                 vs       2017 SBB key programmer  v46.02

 

2017 SBB key programmer abilities:
1. Programming new keys.
2. Reading keys from immobilizers memory
3. Deactivating keys no longer in the car owners possession
4. Operation by means of a menu guided programming
5. Programming new remote controls
6. Software with full database containing all the most important vehicle makes

 

How to use SBB key programmer 46.02:

 

  1. Before running SBB key programmer, please insert the blank new key into your car keyhole;
  2. Turn on ignition switch, and make sure the battery of your vehicle is good;
  3. Insert SBB 16-pin interface into your car OBD2 diagnostic seat, and follow the instructions showed on the SBB key programming tool screen;

SBB copies chip according to car model, and it program key (not clone key),  it only needs to insert SBB 16-pin interface into your car OBD2 16pin diagnostic seat, then read out immobilizer pin code from immobilizer dump/eeprom of the car before writing it into new blank key.

 

Note: For Ford and Nissan vehicles, you need pincodes to program keys.

 

How to update Slica SBB clone to v33.02:

 

Free download Slica SBB V33.02 dumps on Mega:

https://mega.nz/#!gCp1DISZ!WM9sjhrTmQAbREvI9NlCfAXWiQtoaiFakIHQHFUfrmk

Again, this is update for china clone.

Do it on your own risk !!!!!!!!!!!!!

 

Here is the how-to’s…

 

download versions for SBB keyprog. MHH has a few on the forum.
inside the file, you will find three bin files: U3, U4 and atmel 24C16
U3 and U4 are bin files for flashes COP48 is mask and fleshs are 29F016TI-90G.
Atmel 24C16 is bin file for EEPROM
desolder from SBB PCB U4, U3 and 24C16… and put them in a programmer, read it and SAVE ORIGINAL DUMP from them !!!!!!!!!

then you can reprogram them with new version that you downloaded
and finally, when you solder 24C16 EEPROM on SBB PCB, lift Pin 7 EEPROM from PCB and conect it directly to Pin 8

and then you have a write Protect on EEPROM 24C16

Close your SBB key programmer and you can work

i try to update mine and i broke it i got only back light for lcd and not work. but i buy new and try again and i success

ALL THE BEST!!!!

eobdtool.co.uk