In the previous post, we introduced how to add Audi A4L keys by Xhorse VVDI MLB Tool and Key Tool Plus Pad. Today we will use Xhorse VVDI2 Programmer to work with MLB-Tool to perform the same function (200 remote points are required for key data calculation)
Step 1: Connect device and key
Connect VVDI MLB Tool and computer via USB cable
Place the original key in the device identification area for identification
Open the original car key, and connect the key PCB and MLB-Tool via the welding harness as default
Step 2: Collect key data
Click “Collect Key Data”
Select “No OEM key”
This calculation will deduct 200 remote points.
It will take about 3-4 minutes. The server takes approximately 10 seconds to calculate.
Save the calculation results after the calculation is complete.
Step 3: Make dealer key
Step 4: Learn key
Turn on the ignition switch
Connect VVDI2 key programmer and the vehicle via OBD cable, and connect VVDI2 to computer via USB cable
Place the remote in the induction area
Run VVDI2 software and select Audi software
Select Key Learn>> MLB Immobilizer system>> Read vehicle information
The key count is 2.
Click “Key Learning”
Load the calculation data saved in step2
Learn two keys one by one
All keys learned successfully.
Alright! That’s the whole process to add Audi new keys by Xhorse MLB Tool and VVDI2 Programmer.
