My Digimaster 3 gives me an error message reading “Connecting server (sale.autoemaster.com)/ Network error: 0X2742” when I start the machine. What could be the problem?
A: It means the device has not been connected to the factory server. The problem could be your network or your internet connection. Please make sure your network or your cable is well connected.
Q: How to know which adapter and port I should use to connect the mileage correction tool? What method I could use to adjust mileage?
A: 1) Please carefully read the manual book of Digimaster 3 mileage correction tool. It will let you know which port, which adapter and what method you should use for a specific car model.
2) You can look these information up in your manual book. If you have lost it, here is a link for your reference:
It shows car models (mostly are vehicles built after 2008) that this mileage correction tool supports. Inside the pdf document, we also list the corresponding adapter, location storage and way to use the device for different car models.
Q: Can I use digimaster3 odometer reset tool to adjust mileage for my car via OBD diagnostic socket?
A: For different vehicles, the mileage correction tool method will be different. For example, Digimaster 3 usually does not use OBD2 port when adjusting mileage for Renault cars; instead it requires to de-solder the chip and to connect it to main unit by OBP adapter. But it can change mileage via OBD2 port when working with most VW cars and some BMW and Mercedes Benz.