Topic: Which device can read and write BMW MSV90? Eobdtool.co.uk engineer’s suggestion: KT200, CGDI BMW, FC200/AT200, Yanhua ACDP with module 27 1.KT200/KTM200 (in boot mode): KT200 ECU List Read and write MSV90 DME in KT200 software: Open… Continue Reading
Eobdtool.co.uk engineer tested and confirmed that VW MPC555/6-VAG EDC16U1 EEPROM can be read and written by KT200/KTM200 ECU programmer in Bench mode without any issue. This is VW MPC555/6-VAG Bosch EDC16U1 ECU module. Before the operation, connect KT200 ECU… Continue Reading
Yanhua ACDP Module 28 is specially designed for Jaguar, Land Rover, Chrysler, Dodge, Fiat, Honda, Jeep and other models of the ZF-9HP gearbox clone in BOOT mode. Compared to the traditional cable connection, it’s simpler, safer, more efficient and reliable.… Continue Reading
Some guys encounter this problem:After getting ecu bench tool and installing the application, registration is complete. I had try it right away on edc16u34 and it won’t read ID. always says S1 and S2 pinout error. Solution: Make sure the… Continue Reading
KT200/KTM200 ECU Programmer supports OBD/BOOT/BDM/JTAG and multiple protocols for Bosch, Magneti Marelli, Continental, Denso, Delco, Temic or Siemens covering up to 5400 ECU, over 500 TCU, i.e Volvo MPS6, VAG DQ400e/SQ100, Jeep 9H28 TCUs. With the ECUHelp 3.0 software, customers… Continue Reading
When you use KT200/KTM200 to perform ECU maintenance chip tuning, DTC code removal on BOSCH, MAGNETI MARELLI, CONTINENTAL, Denso, DELCO, TEMIC or SIEMENS by bench, boot, BDM/JTAG and OBD mode, you’d better install KT200 software V22.08.20 on Win10 32/64bit with… Continue Reading
The newest V22.08.20 KT200/KTM200 software solved the problem that the mobile network cannot connect to the server, added the boot screen to solve the long-term unresponsiveness of the click software and optimized the virtual data read and write functions. Here… Continue Reading
KT200 ECU programmer read Audi Med9.1 EEPROM via bench mode approx. 3 Min, no issues! Preparation: KT200/KTM200 ECU programmer Full Version (incl. KT200 main unit, Bench box, network cable, pinout line) Audi Med9.1 ECU Computer KT200 BOSCH MED9.1 (MPC561/2)- Audi Pinout (Also… Continue Reading
If you have the problem ‘Windows encountered a problem installing the drivers for your device’ when installing KT200 software, just disable driver signature enforcement to solve this error quickly by the following guide. Go to Taskbar settings>> Home Enter… Continue Reading
KT200/KTM200 can read and write ECU via OBD/Bench/BOOT/BDM/JTAG. Eobdtool.co.uk engineer has tested and confirmed it works on BMW EDC16 C1, HONDA EDC17 C58, VAG MG1CS001, AUD SH7055 and SAK TC1738 without any issue. The test: BMW EDC16 C1 MPC555/6-… Continue Reading
Which tool can read and write DSG gearbox data for VAG DQ200/DQ250 (02E)? Here recommend Godiag GT107 ECU IMMO kit, Kess V2, PCMTuner, Tactrix Openport 2.0 and CG FC200, which have been tested and confirmed all work well for VAG… Continue Reading
