I have tested some other models: EDC16U1 (VAG) Read/Write ok (OBD) EDC15V (VAG) Read/Write ok (OBD) Audi A6 (TRICORE BOOT) E70 3.0D EDC16 (BDM) Renault Delphi 2007 k-line I use FGtech V54 want to read and write SF10Fxx (K-Line) via Tircore Boot… Continue Reading
The newly launched KTAG V2.13 KTM100 Firmware V7.003 ECU programmer adds some vehicle model EDC17 ECUs, please check below: BMW EDC17C41 TC1797 EDC17CP45 TC1797 EDC17C50 TC1797 EDC17C56 TC1797 EDC17CP49 TC1797 MEVD172G TC1797 MEDV1725 TC1797 VW EDC17C46 TC1797 EDC17C44 TC1797 MED17.1.6 TC1797 MED17.5.21 … Continue Reading
Following are the most frequently asked questions of FgTech Galletto V54 ECU tuning kit Master version. About software: Q: I have got my package, but the CD is broken, where and how can i get the software? A: Sorry, you… Continue Reading
Kess V2 Vehicle List Download: http://www.eobdtool.co.uk/upload/pro/kess-v2-obd2-tuning-kit-vehicle-list.xls Attention: Pleas do not update Kess V2 China clone online. Notes: 1. Be sure that Anti-Virus software is disabled or closed Please be attention,anti-virus software will treat our KESS V2 OBD tuning software as… Continue Reading
Problem: When install FGTech Galletto 2, the FTReadWrite replied “Can’t find device” error message. When trying to uninstall the driver, the window screen warmed it is not FGTECH device, but USB-to-Serial device. If install the driver, fgtech software did not run and FTReadWrite or MProg didn’t find the ftdi chip. Try to install the driver on both win 7 and win xp computer over and over, but in vain. Solution: 1) Download and install the Virtual Com Port drivers from FTDI website: Virtual COM Port Drivers http://www.ftdichip.com/Drivers/VCP.htm 2) Then connect the FGTech to computer via USB port which had no device programmed and 1 blank device when the MProg Utility it shows. NOTE: If you had backup and reprogram with the ept file. The system will not recognize the FGTECH Galletto 2 and will not reprogram the firmware bin file. The Virtual Com Port Drivers would overlay the fgtech ECU programmer. Then you have to again download the related driver in FTDI website. CMD Uninstaller 1.4 http://www.ftdichip.com/Support/Utilities.htm 3) After install the right drivers, FTReadWrite programmed the backup firmware file, run FGTech software by referring to the user manual on obd365 webpage. www.eobdtool.co.uk here offers some FGTECH related files download.
Newest V2.11 software for KESS V2 has been just launched for a short period of time, and now obdtoolshop offers you the lastest V2.13 KESS V2, attached with lastes V2.13 softare. Software Version: V2.13 Hardware Version: V 4.036 Pre-installation Important Tips: 1. Disable Internet connection and PC/Laptop CANNOT have… Continue Reading