GODIAG ECU GPT Boot AD and Openport Read Ford/JLR SID208 ECU

GODIAG ECU GPT Boot Adapter can work with SM2 Pro J2534, Godiag GT100+ OBDII Breakout Box, and PCMTuner Dongle with pcmflash software to read Ford/JLR SID208 ECU (click here to review). It also can perform this function with Openport 2.0 tuning tool.

 

With Godiag GT100+, you can check the communication directly.

 

Step 1: Read Password (Boot mode)

1.Connection

Ford/JLR SID208 ECU Boot Mode Tricode SAK TC1797 Pinout diagram to Godiag ECU Adapter

Pin 39, Pin 5: +12V (Red)

Pin7, Pin2: Ground (Black)

Pin 11: CAN-L (Orange)

Pin 10: CAN-H (Blue)

godiag ecu adapter and openport read ford sid208 1

  • Connect GODIAG ECU GPT Boot AD to GT100+ and SID208 via the jumper cable according to the corresponding wiring diagram
  • Connect Godiag GT100+ and Openport via OBD cable
  • Supply 12V power to GT100+ ECU Connector
  • Plug pcmtuner smart dongle into PC

godiag ecu adapter and openport read ford sid208 2

NOTE:

When simulating reading the car password, you must press the switch on Godiag ECU adapter. Otherwise, it cannot be read.

2.Read and save password

Run pcmflash software

Select Interface: J2534: Tactrix Inc.-openport 2.0 J2534 ISO/CAN/VPW/PWM

ECU: [07] JLR: Defender 2012.2.2L TD4 (SID208)

Identify the ECU info- OK

godiag ecu adapter and openport read ford sid208 3

Follow the prompt to read password- OK

Save the password after reading

godiag ecu adapter and openport read ford sid208 4

Step 2: Read and write ECU

1.Connection

Use a screwdriver to dismantle the ECU

Connect ECU with Godiag Adapter according to the previous wiring diagram

Then solder the chip to the PCB board according to the wiring diagram

Directly connect the red wire to CNF1 on the PCB board

Connection is completed.

godiag ecu adapter and openport read ford sid208 5 godiag ecu adapter and openport read ford sid208 6

2.Read Micro & EEPROM data

Run pcmflash software

Select Interface: J2534: Tactrix Inc.-openport 2.0 J2534 ISO/CAN/VPW/PWM

ECU: [53] Infineon: TC1797 MICRO (4096 KB)

Identify the ECU with automatic power control (L-Line)

Must manually pop up the switch button on Godiag ECU GPT Boot AD ECU Connector

Identify ECU successfully

godiag ecu adapter and openport read ford sid208 7

Select Continental Ford SID208 and password saved in step 1 to read Micro data and save it

godiag ecu adapter and openport read ford sid208 8 godiag ecu adapter and openport read ford sid208 9 godiag ecu adapter and openport read ford sid208 10

Then continue to read EEPROM data

Select [53] Infineon: TC1797 EEPROM (64 KB)

Use the same method as micro to identify the ECU, read and save EEPROM data

All work fine!

godiag ecu adapter and openport read ford sid208 11 godiag ecu adapter and openport read ford sid208 12

 

UK Professional OBD2 Tools Online Shop

eobdtool.co.uk