GODIAG ECU GPT Boot AD Programming Adapter can be used for ECU PINOUTs of different manufacturers and brands according to the wiring definition. Here eobdtool.co.uk shares the links to get the ECU PINOUT wiring diagram.
There are too many ECUs on the market, and there are multiple ways to connect the same ECU. The ECU connection and read/write methods are also different in different regions. Because it is not possible to read and write all ECUs through the OBD2 diagnostic interface or without opening the ECU shell, there are still many ECUs that need to open the cover to read and write data. This Godiag Adapter can be simulated as a standard OBD2 diagnostic interface, can be connected without disassembling the ECU (GPT bench), and also supports disassembling the ECU connection (BOOT).
GODIAG ECU GPT Boot AD Review:
1.For the wiring diagram using PCMFLASH PINOUT, please refer to https://pcmflash.ru/downloads/english.html
i.e.MED17.5 TC1766
- The PINOUT connection diagram of DIMsport KESSV2 KTAG product
3.For the PINOUT connection diagram of EVC products, please refer to https://www.evc.de/en/product/bsl/ecu.asp
The L connection point is connected to the Boot connection port on the GODIAG ECU GPT Boot Adapter, and the H point is connected to CNF1.
4.For the PINOUT connection diagram of kt-prog or FOX FGtech products, please refer to https://wiring.fg-technology.uk/index.php?m=Home&c=wiring&a=index
The Gray line connection point in the picture is Boot. The CNF1 or 3.3V in the picture is connected to the 1KΩ resistor point, or the resistor is connected as shown in the picture. The brown wiring in the picture is connected to GPT0, and the white wiring in the picture is connected to GPT1.
5.For the PINOUT connection diagram of obdtuning products, please refer to https://wiki.obdtuning.de/index.php/Hauptseite
OBD2 Bench, GPT Bench, Boot
You also can directly free download ECU OBD2 GPT Boot PINout.zip. (3.15 GB)
Follow the corresponding Pinout connection diagram to connect GODIAG ECU GPT Boot AD ECU Connector, J2534 device/ECU programmer (Foxflash, SM2 Pro, PCMTuner…), and ECU, and then perform the ECU reading and writing operations…
How to Read/Write ECU with GODIAG ECU GPT Boot AD and J2534 Device?
