Newest V2023.03 MB SD C4 C5 software (Xentry/ DAS) comes with W223 W206 W213 W167 Software License for free (valid to August 10th), it’s compatible with MB SD C4/ C4 Plus/ C5, OEM Benz C6, Super MB Pro M6 and M6+. Check how to activate the related software inside for using on Win10 Pro 64 bit.
Click here to review the V2023.03 MB SD C4 C5 Software.
Kindly notice:
After receiving V2023.03 MB SD C4 software SSD or HDD, customers must not close or uninstall their own Tinder anti-virus software, otherwise, the Mercedes-Benz software will be damaged.
Activation guide:
There is four software need to activate including Xentry, DTS, Vediamo, and EPC.
Before activation, go to this PC>> BEN System (C:) >> ProgramData>> LicDir to delete lic_key_2.x4711 file.
Note: if there is no this file, skip this step.
Create a new notepad to record the software hardware ID
Step 1: Copy Xentry hardware ID
- Open ConfigAssist on the desktop
Select SDconnect>> Configure>> copy hardware ID in the device data
Paste on the notepad
- Open XENTRY Diagnosis Cars on the desktop
Copy the hardware ID and paste on the notepad
Step 2: Copy DTS Monaco hardware ID
Open DTS Monaco on the desktop
Copy the hardware ID and paste on the notepad
Step 3: Copy Vediamo hardware ID
Open Vediamo Start Center on the desktop
Copy the hardware ID and paste on the notepad
Step 4: Copy EPC hardware ID
Run EPC-2018 on the desktop
Log in with the user name (admin) and password (1234)
Click Server>> Edit the access authorization
Copy the current MAC address (LAN-ID) and paste on the notepad
Then send all IDs to your seller for activation, and they will send you the activation code.
Copy the corresponding activation code and paste them to the designated spot
For Xentry:
Click Manually in the ConfigAssist program
Paste the activation code on the Startkey input box and click “Save”
Then copy the activation code to Xentry Diagnosis Cars, DTS Monaco, Vediamo Start Center and EPC and paste them in the key position in sequence
Finally, copy lic_key_2.dat file and change the name to lic_key_2.x4711
Now all V2023.03 Mercedes Star Diagnostic Xentry Software activation procedures are completed.
Use the user name (xentry) and password (88888) to log in XENTRY Diagnosis Cars or XENTRY Diagnosis Trucks program, then you can see the newest car/truck models supported.
Other programs are also can be used normally.
