Use the Launch X-PROG3 PC Adaptor and X431 X-Prog3 to clone Infiniti VGS2-FDCT gearbox computer on bench, works like a charm!
Here is the operation process:
Connect the X-PROG3 PC ADAPTOR to the computer using a USB cable, and then connect the X-PROG3 PC ADAPTER to G3.
Run X-PROG3 PC Adaptor PC Software
Note: For the first time using, need to activate device with serial number and activation code. Just follow the prompt to operate.
Input vgs2-fdct in the search box
Quickly obtain the desired ECU model: Infiniti Q30 2015-2016 ENE 2200 CDI AWD 170 VGS2-FDCT TC1784.
Click the ECU to enter the operation page
First, click [Direct Connection Diagram] to obtain the ECU connection diagram, and then connect the VGS2-FDCT gearbox computer and Launch X-Prog3 PC Adapter via the professional bench cable (jumper) or X-PROG3 Adapter Cable 8 (VGS2-FDCT/VGS-FDCT), and supply power to XPROG3 PC Adapter as well
Then, click “Connect” to read the chip ID
Next, Read EEPROM data and FLASH data in sequence, and save the original data file after reading
After that, connect X431 XPROG3 PC Adapter to a new Infiniti VGS2-FDCT gearbox computer, select the corresponding original EEPROM and flash data file to write into the new ECU
Finally, disconnect
All work fine!
Launch X431 ECU & TCU Programmer with its PC software also can perform the same function for Infiniti VGS2-FDCT gearbox computer, no need to work with X431 X-Prog3 GIII key programmer and X431 tablet.